Apple Airport Express Review

Average Reviews:

(More customer reviews)August 22, 2009 Update
-----------------------
The software that comes with new Airport Expresses is much more user friendly. You may find going through the instructions listed below is not required.
Regards,
S. Monroe
-----------------------------------------------------------
The CD that comes with the Airport Express has been useless to me in setting up a Windows XP computer to work with an AE. The instructions below should get you up and running.
1. First download the latest version of both the Airport Update and Airport Express Firmware Updater from [...]
2. Run the latest version of the Airport Update (4.1 at the time of this writing)
3. Disable your firewalls, plug in the Airport Express (AX) to an electrical outlet and attach it to your computer or router with an ethernet cable. The AX will have a steady or blinking yellow light.
4. Launch the Airport Admin Utility...it should detect the Airport Express in the "Base Station Chooser" within a minute or so and the light on the AX should turn green. You may have to hard reset the unit a few times by pushing the small reset button with a paperclip for about 10 seconds. If, like mine, it does not show up in the Airport Admin Utility leave the AX attached by ethernet and reboot, launch the Airport Admin Utility, and hopefully it will show up quickly.
5. As soon as it does show up, launch the latest Airport Express Firmware Updater (I used 6.1.1) and update the AX...this seemed to make a significant difference in the ease of detection later. This will take a minute or so. The AX will reset and you may have to leave it attached by ethernet, reboot, and relaunch the Airport Admin Utility to detect it again.
6. Once detected by the Airport Admin Utility, click the "Configure" button in the lower right hand corner.
7. A new set of tabs will pop up. Click on the "Airport" tab and select "Create Wireless Network" from the Airport Network dropdown box. This will be changed to "Join an Existing Wireless Network" later.
8. Now click on the "Network" tab and and check the "Distribute IP Addresses", the "Share a single IP address" button, and from IP range drop down list choose the IP range for your router (192.168.x.x being the most common for Dlink, lynksys, Netgear, and other non-Apple routers).
9. Go back to the "Airport" tab and change the "Create a Wireless Network" to "Join an Existing Wireless Network".
10. In the "Network Name" box type in the name of your wireless network (also called your SSID)
11. On the same page rename your AX to whatever you want it to be called in iTunes (often the physical location of the speakers the AX will be attached to, ex: Living Room, Bedroom, Ambient Sound), give it a new password (required), and give it a location.
12. If you are using security click on the security button, choose your encryption settings, and add your WEP key or password, etc. It might be handy to have your router security info open in a window so you can copy and paste the key right into the appropriate box.
13. If you now go back to the "Network" tab you will see everything is greyed out but now your new IP Range settings are visible.
14. With the AX still attached by etherlink, click the "Update" button and wait a minute or so for the AX to update. The changes you made should be reflected in the Airport Admin Utility when the update is complete.
15. Now you can launch iTunes and you should see a button in the lower right hand corner that says "My Computer". Click this button and you will see you have the choice of your computers speakers or the AX. Any further changes you want to make to the configuration such as the name you see in that button are easiest done while attached by ethernet so try to get it the way you want it with further Airport Admin Utility updates before unplugging the ethernet cable. As long as your Airport Admin Utility can see the AX you can update without being connected too.
16. When you are satisfied with the configuration and the AX is updated and is showing up in iTunes go ahead and unplug the ethernet cable. Now you can move The AX to your chosen locations electrical outlet, and hook up the audio cable. The AX light will blink yellow for a few minutes while being detected and then turn green. You can now choose your AX in iTunes and start playing your music as normal. Itunes will show it is busy connecting to the AX for about 30 seconds and then hopefully you will hear your music played from your remote speakers. I hope pulling this information together helps someone a little. Let me know if I missed something and I will update asap. Good Luck!

Click Here to see more reviews about: Apple Airport Express

Click here for more information about Apple Airport Express

Read More...

Apple AirPort Extreme Base Station (Simultaneous Dual-Band) (MC340LL/A) Review

Average Reviews:

(More customer reviews)Ah jeez, what can I say. I can do most anything with a computer, Apple or PC, but when I try to configure a network, gremlins keep any of it from working. When my Netgear "lost its settings" spontaneously, they were kind enough at technical support to offer to fix it for me for 99 bucks. When I declined they offered up that I might go to their website for support tips. But I had spent too many hours when I first bought that router, I was done. So I purchased this router and it is just like other reviewers have said: plug it in, stick in the disk, answer a few simple questions, and it's done. THIS is how consumers LIKE computers to work. Bemoan the higher price tag if you want, but I will pay a little extra for things that just do their dang job and don't aggravate me NEEDLESLY!

Click Here to see more reviews about: Apple AirPort Extreme Base Station (Simultaneous Dual-Band) (MC340LL/A)

Click here for more information about Apple AirPort Extreme Base Station (Simultaneous Dual-Band) (MC340LL/A)

Read More...

Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port Review

Average Reviews:

(More customer reviews)Got this primarily so we could work anywhere in the house on our PC laptops. Granted, a Linksys wireless router would have been cheaper, but the Airport Extreme also serves as a wireless print server and that (plus the fact that our primary computer is a Mac) was what sealed the deal for us. Our cabling setup is:
Cable modem -> Linksys Wired 4-Port Router -> Airport Extreme -> Lexmark Optra E312L
Our laptops use Linksys Wireless-G cards and get good reception throughout the house. Our G4 and PS2 are hooked directly into the wired Linksys Router for their connectivity. The trick to using it with an existing router is to turn off the NAT addressing feature of the Airport Extreme so that it acts only as an Ethernet "bridge" to the wireless computers; the Linksys router assigns all the IP addresses for everything on the system including the PC laptops. The PCs can print wirelessly to the laser printer via the Airport and so can the Mac. Bonus!
Setup was very quick - about 15 minutes to get everything plugged in. The hard part was getting the security set up correctly (and yes, you'd better secure your wireless network) as the format for passwords was different on the Mac vs. PC platforms. Had to do some Web searches to find out how to make them speak the same language (hex). Has worked flawlessly since then. If I had to do it over, would buy it again in a heartbeat.

Click Here to see more reviews about: Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port

The AirPort Extreme Base Station with Modem and Antenna Port is compatible with the industry-standard 802.11b wireless networking protocol, which means all AirPort products, as well as Wi-Fi certified 802.11b wireless products. For higher performance you will need to have both the Airport Extreme Card and the AirPort Extreme Base Station. The range of AirPort Extreme is up to 50 feet at 54 Mbps and up to 150 feet at 11 Mbps. The Base Station can be used in conjunction with an Ethernet connection (such as with a cable modem, DSL modem, or Ethernet network) through the integrated Ethernet port, or with a telephone line through a modem.
The AirPort Extreme Base Station with Modem and Antenna Port also supports USB or Ethernet wireless printer sharing. Just plug in a compatible USB or Ethernet printer and with Mac OS X on your computer you can quickly and easily print. You can use the new USB port to attach a USB printer or use the 10/100BASE-T Ethernet LAN port to plug in an Ethernet printer directly into the base station.
With the new AirPort Extreme Base Station with Modem and Antenna Port, up to 50 users can work and play on the Internet simultaneously up to 150 feet away from an Ethernet connection or a phone line. The Base Station comes equipped with a built-in firewall to protect sensitive data on your computer and the ability to secure transmissions with support for 128-bit encryption.
The AirPort Extreme Base Station with Modem and Antenna Port lets you manage the range of your wireless network. An external antenna port is provided for you to attach an external antenna. There are two types of antennas available: an omni-directional and a directional, which extend the range of the AirPort Extreme base station. There is also a software feature that allows you on reduce the size of your wireless network, down to just a single room for extra privacy.

Click here for more information about Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port

Read More...

Cradlepoint Travel Router CTR-500 Review

Average Reviews:

(More customer reviews)Before getting the CradlePoint router I was using the Apple AirPort Express as my travel router. However, the CTR500 is now the router of choice in my bag. It works great and has a slew of configuration options. CradlePoint does make a battery operated version, I just wish that this one was one. I also wish that the AC adapter were smaller. Otherwise, this thing rocks!

Click Here to see more reviews about: Cradlepoint Travel Router CTR-500

Get 7% OFF

Click here for more information about Cradlepoint Travel Router CTR-500

Read More...

Apple AirPort Extreme Base Station - Wireless access point - Ethernet, Fast Ethernet - 802.11b/g Review

Average Reviews:

(More customer reviews)I've been using Linksys BEFW11S4 802.11b router for few years now. Other than somewhat short range, it has never let me down. After looking at cheaper alternatives, I bought the AirPort Extreme Base Station (AEBS) as my second WiFi router.
Pros:
- Looks really really really cute... and small, too
- Better signal strength than Linksys BEFW11S4
- Innovative USB printer support
- Superb AirPort Admin Utility and tight Mac OS X integration
- Bridging with other WiFi station via WDS (for expanding the range)
- Wall mountable (comes with wall mounting kit)
- AOL and RADIUS server support
Cons:
- Susceptible to signal loss (i.e., when using the microwave oven)
- Pricier than most 802.11g router
- No web-based configuration interface
- Only 1 LAN port
When you run the AirPort Admin Utility for the first time, it might detect an older firmware and proceed to upgrade itself automatically (if you let it, of course). The new firmware (5.0.4 as I write this) fixes WiFi connection drop issue. For some strange reason, the problem persisted until I manually downloaded and uploaded the latest firmware. I've tinkered with the channel selection to get the optimum results. Running the microwave oven may cause WiFi connection to drop still, however.
The AirPort Admin Utility is a pleasure to use, which is also full of features. Among the options are choosing among 11 WiFi channels; operating in 802.11b, 802.11g or mix mode; setting the transmission power from 10 to 100%; setting up Internet via DHCP, static IP, PPPoE, or AOL DSL; and mapping ports. You can improve security via 40-bit or 128-bit WEP, create a closed network by hiding SID (Station ID), and add access control (MAC address filtering).
By the way, if you are running Windows, go to Apple's web site and download the AirPort Admin Utility for Windows. It does not specify AEBS, but trust me... it works.
Oh, did I mention how beautiful AEBS is? I tucked my ugly Linksys where no one can see (which probably hinders WiFi broadcast), but not so with AEBS. Located on the front are beautiful metallic Apple logo and three graphite status indicators (WiFi, power, and Ethernet). Located on the rear are reset button, 100/10BASE-T WAN port, 100/10BASE-T LAN port, USB printer port, and AC power adapter port (very long power cable is included). If you need more than one LAN port, you will need to mate AEBS with an Ethernet hub.
The signal level's stronger than Linksys BEFW11S4. I get full signal virtually everywhere in my apartment, including those where Linksys frequently gave up. If you need greater range (larger house), consider bridging ABES with another ABES via built-in WDS support (Wireless Distribution System) or purchase ABES with Modem and Antenna Port (and one of few external ABES antennas available).
Finally, I must mention its built-in USB printer port. Hookup one of many supported printers via USB and you will be able to print wirelessly via Mac OS X's Rendezvous feature. Neat!

Click Here to see more reviews about: Apple AirPort Extreme Base Station - Wireless access point - Ethernet, Fast Ethernet - 802.11b/g

Click here for more information about Apple AirPort Extreme Base Station - Wireless access point - Ethernet, Fast Ethernet - 802.11b/g

Read More...