NETGEAR FVS318 ProSafe VPN Firewall 8 with 8-Port 10/100 Switch Review

Average Reviews:

(More customer reviews)I have been using the Netgear FVS318 router firewall for over a month now with not one glitch. For the money, this is an amazing bargain considering it is a true SPI firewall and a certified ipsec VPN endpoint for eight tunnels included with a eight port switch! The quality of Netgear products are also commendable.
We had it up and running in less than fifteen minutes. My son configured two ipsec vpn tunnels with his friends networks using Linksys VPN routers in short order and I have one configured to my Windows 2000 computer at work that is behind a nat router using Windows 2000 built in ipsec capabilities. All three of our ipsec tunnels have proven to be reliable. I also have no problems using remote desktop through port 3389 or going to my pptp Windows 2000 vpn server through port 1723 behind the FVS318.
We have not experienced any of the problems that other reviewers have, but we have experience configuring these kinds of devices. The FVS318 has fairly extensive built in logging though it does not store much information itself but it can be configured to transfer log information to another computer and can even send you an email alert if certain attacks are detected. It has configurable services based on ports and protocols that are used to create port forwarding to inbound services and block outbound services. However you are limited to 16 services. It can control outbound traffic which is very important to defend against undetected trojans or users [and kids] running things like file swapping or other unapproved applications that access the internet. Internet access can be even controlled by a day/time schedule. If your network is fairly simple, a default block all rule could be created [which must be at the end of the list] and then you can specify what outbound services are allowed. It is also possible to deny a computer or address range of computers from having internet access while allowing others full access. Though the block services is a great addition to this device, it is somewhat limited if you have more than a few variations of configurations compared to a more sophisticated [and much more expensive] soho firewall, and the services can not be configured to use certain ip address/subnet destinations for outbound control which should not be a big deal for most home/small office users. However inbound services/port mapping can be configure to come from specific ip address/subnet. That is an important security feature. For instance if you open an internal computer for remote managment, you can configure the FVS318 to accept connections from only one ip address, which will keep everyone else on the internet from trying to connect and guess your password!
I am very impressed with the Netgear FVS318. Being a true SPI firewall and ipsec VPN endpoint with all the other feaures it has in a quality package, I can highly recommend it to anyone that wants a bargain priced internet device that is a big step up from the consumer grade nat routers.

Click Here to see more reviews about: NETGEAR FVS318 ProSafe VPN Firewall 8 with 8-Port 10/100 Switch

The NETGEAR FVS318 ProSafe VPN Firewall 8 with 8-Port 10/100 Switch offers the small office a space-saving design combining wired connectivity, a NAT router, VPN appliance, SPI firewall, and an eight-port 10/100 Mbps Ethernet switch.
Wired and Wireless Connectivity The FVS318 has a built-in switch, with eight 10/100 Mbps auto-sensing, Auto Uplink ports. With Network Address Translation (NAT) routing, up to 253 users can simultaneously access your connection.
High-class Security For businesses that require more than just a simple NAT router, the FVS318 offers significantly more protection. It provides: a Stateful Packet Inspection (SPI) firewall to prevent Denial of Service attacks, an Intrusion Detection System (IDS), the ability to block Java/URL/ActiveX based on extension, and FTP/SMTP/RPC program filtering.
The FVS318 has eight dedicated VPN tunnels to protect links between remote locations, encrypting the data between them. IPSec-based encryption up to 256 bit is also supported. This lets you easily create secure connections to branch offices or mobile workforces.
Easy Setup Even with all the functionality the FVS318 provides, NETGEAR makes setup a breeze with the intuitive Smart Wizard that connects you to your ISP quickly. The web-based configuration screen is easy-to-use and requires no additional software. DHCP and PPPoE support makes widespread deployment simple.
The NETGEAR FVS318 ProSafe VPN Firewall 8 with 8-Port 10/100 Switch is backed by a 3-year warranty.
What's in the Box FVS318 ProSafe VPN Firewall, power adapter, category 5 ethernet cable, installation guide, resource CD, warranty/support information card.

Click here for more information about NETGEAR FVS318 ProSafe VPN Firewall 8 with 8-Port 10/100 Switch

Read More...

TRENDnet 54 Mbps Wireless G Broadband Router TEW-432BRP (Blue) Review

Average Reviews:

(More customer reviews)Upgrading finally from my B router. Probably the last one in the neighborhood to do so.
There are three versions of the TEW-432BRP (the outer casings look slightly different). They're roughly labelled A, B, and C. I wound up with the C one. Its the best G router i've ever seen, for a few reasons:
1. "Easy CD" actually worked and led me through a wizard that had me running in under 5 minutes. It was even intelligent enough to figure out that my cable company's router needed a reset.
2. When you go into the firmware, there are some interesting and unusual settings you can tweak. It has the usual things like 'dont broadcast ssid' and all the rest of it. But it also had unusual settings that I'd never seen before, like the ability to set the output of its signal at "full power" or "half power" or "quarter" or "eigth" or "minimum". Seemed like an interesting option; I usually sit 10 feet from it, maybe I can reduce the microwaves bombarding my brain? I tried it on the various levels and did throughput tests. Interestingly, it was at "quarter power" that I had the fastest throughput. I dont know why, but I can live with that. I was glad to have that option to reduce the output signal's power level in the router, though.
3. Excellent transmission spread, strong signal, and fast. I know the bottleneck is supposed to be the dsl/cable conneciton itself, but I would swear my browsing is faster and snappier now. And my connection speed to my local network drive improved five-fold (which was why I got a g router in the first place).
Its a great deal under twenty-five on sale.

Click Here to see more reviews about: TRENDnet 54 Mbps Wireless G Broadband Router TEW-432BRP (Blue)

The 54Mbps Wireless G Router offers a complete wireless solution that allows you to share files, an Internet connection, or network resource while protecting your network using enhanced security features. Simply plug your workstations and your broadband modem into the Wireless G router, and configure your broadband connection using its built-in Web Interface. Use the Virtual Server feature to configure any workstation as a Web Server or FTP server easily, allowing users to view files from the Internet. You can also protect your Wireless LAN using 64/128-bit WEP encryption or industry standard WPA-PSK with TKIP or AES algorithms. Increase security by enabling MAC, IP, or Protocol Filtering as well as setting Firewall Rules to limit Internet Access or block malicious intruders from accessing your network.

Get 70% OFF

Click here for more information about TRENDnet 54 Mbps Wireless G Broadband Router TEW-432BRP (Blue)

Read More...

Cisco-Linksys BEFSX41 EtherFast Cable/DSL Firewall Router (4-Port 10/100 Switch / VPN Endpoint) Review

Average Reviews:

(More customer reviews)I've used two SX41s for over three years on DSL and they are rock solid providing that I don't violate the cardinal rules of operation. The VPN tunnels are easy to set up if you follow the guidelines. First of all you must use a stable firmware. 1.45.7 is the most stable. The latest 1.52.9 is okay, but not as stable. Also you must NEVER set any of the Web Filters to deny or you will have reboots. Generally it is as simple as that.
There are also rules for flashing that must be observed. It doesn't matter whether you use a ver 1 firmware on a ver 2 router or visa versa. Thinking there is a difference is nonsense. What DOES matter is that the router MUST be reset to factory defaults (30 secs on the reset button will do this) before a flash or you risk bricking the router. When flashing with the Web page flashing tool, use IE or you will risk bricking the router. Use the TFTP utility for the SX41 obtainable from Linksys if you wish to use a Mozilla-based browser to flash. After you flash, you should reset once again to factory defaults. There are residual register settings carried over from the previous firmware versions that can cause reboots and other malfunctions.
Even the best flashing procedures can fail, but there are procedures for recovering from a bad flash at DSLReports.com. The recovery rate is probably better than 90% using those techniques. Guidelines for setting tunnels up are also posted there as well as access to the 1.45.7 stable firmware.
Successful operation of the SX41 requires modest intelligence, some networking experience, and following the operating rules. Linksys support hasn't a clue as to what those rules are so don't even bother with them unless you are trying for an RMA for a defective unit. Basically the router has gotten a bad rap from people who don't know how to operate it. Unfortunately they can't learn how to do that from the minimalist manual or from the so-called tech support personnel. Ask for operation help in the Linksys forum on the above mentioned web site if you are struggling with this router.

Click Here to see more reviews about: Cisco-Linksys BEFSX41 EtherFast Cable/DSL Firewall Router (4-Port 10/100 Switch / VPN Endpoint)

The Linksys Instant Broadband EtherFast cable/DSL firewall router with 4-port switch/VPN endpoint is the perfect solution for connecting a small group of PCs to a high-speed broadband Internet connection or a 10/100 Ethernet backbone. The router can be configured to limit internal users' Internet access based on URLs and/or time periods (URL filtering and time filtering). For enhanced protection against intruders from the Internet, the router features an advanced SPIfirewall.
Use the cable/DSL firewall router with 4-port switch/VPN endpoint to create IPSec VPN tunnels, so you can securely connect to the corporate server from your home office--or from any location, when you're on the road. The router provides a dedicated port for DMZ hosting and acts as the only externally recognized Internet gateway on your LAN. With the performance and security features of the Linksys cable/DSL firewall router with 4-port switch/VPN endpoint, your network will take advantage of the Internet while keeping its data secure.
This router is compatible with Windows 95, 98, NT, 2000, Me, and XP.
Note: All Linksys routers now include a special edition of Norton Internet Security! Claim your free CD-ROM by calling (800) 814-0180, 7 a.m. to 7 p.m. Pacific, seven days a week.

Click here for more information about Cisco-Linksys BEFSX41 EtherFast Cable/DSL Firewall Router (4-Port 10/100 Switch / VPN Endpoint)

Read More...

NETGEAR FVS338 ProSafe VPN Firewall 50 Review

Average Reviews:

(More customer reviews)I bought 2 of these for vpn tunnel between 2 offices, after updating to the june 2007 firmware everything worked like a charm. I share IP based phone system, Ip based camera system, and exchange servers between the two offices, the vpn works great between both offices. Everything works no problems. Maybe this model had problems before but it seems great to me now... Oh another thing I called up netgear support to help me setup the vpn and they practically setup my vpn on both ends by remote login. They made sure everything worked and even called me next day to make sure everything was working fine. All I did later was change the passwords and the vpn key. Overall a good buy.

Click Here to see more reviews about: NETGEAR FVS338 ProSafe VPN Firewall 50

50 VPN Tunnels for Encrypted Remote Access.NETGEAR's ProSafe? VPN Firewall with Dial Back-up is a SNMP-Manageable, high-performance network solution that furnishes multidimensional security. Fully equipped and broadband-capable, this Virtual Private Network (VPN) firewall comes with connection insurance: a built-in serial port for dial-up access. This practical feature means your business can maintain operation if your broadband Internet connection fails.It lets you retain an analog modem for emergency backup and also provides a migration path from analog to broadband, making the transition effortless.High on security, this true firewall provides Denial of Service (DoS) protection and Intrusion Detection using Stateful Packet Inspection (SPI), URL keyword filtering, logging, reporting, and real-time alerts. It supports up to 50 IPSec VPN tunnels simultaneously using Public Key Infrastructure (PKI), reducing your operating costs and improving the security of your network. With 8 auto-sensing, Auto Uplink switched LAN ports and Network Address Translation (NAT) routing, up to 253 users can access your broadband connection at the same time.

Click here for more information about NETGEAR FVS338 ProSafe VPN Firewall 50

Read More...

Asa 5505 Sec Plus Appliance Ul Review

Average Reviews:

(More customer reviews)I use this firewall at my home. Probably overkill, but it had what I wanted. Nice that it runs the same operating system as the larger enterprise size firewalls. The configuration is easy using the intuitive wizards and the GUI. Command line options are easy if you are familiar with Cisco CLI. Built in switch with PoE makes for nice addition. A little on the pricey side for your average home user, but great price point for business users in SOHO environment.

Click Here to see more reviews about: Asa 5505 Sec Plus Appliance Ul

Get 16% OFF

Click here for more information about Asa 5505 Sec Plus Appliance Ul

Read More...

Cisco RVS4000 4-port Gigabit Security Router - VPN Review

Average Reviews:

(More customer reviews)I purchased the RVS4000 primarily due to its gigabit WAN port; very few wired firewalls have a gigabit WAN port. Not having a gigabit WAN port is a reasonable design because WAN ports in many SOHO firewall applications will likely connect to T1 (1.5 Mbps) or T3 lines (45 Mbps) at most. Since these data rates are lower than that of an ordinary 100 Mbps ethernet port, a gigabit WAN port is more than what is required of a WAN interface.
However, I wanted to use a firewall/router on the network inside of my primary NAT/SPI firewall which is primarily a gigabit network. So, a gigabit WAN port was an important feature because it needs to connect to a gigabit switch (not a WAN link).
Before my purchase, I read many customer reviews that complained about slow data rates through the WAN port. These reviews were very discouraging since the Linksys had a gigabit WAN interface. This was until I found a benchmark test that explained the negative reviews. The RVS4000 (primarily due to its industrial-grade security features) has a WAN to LAN data rate of 15.9 Mbps; very slow for a gigabit interface. However, this can be improved upon by configuring (turning off) the security features of the firewall. Unless you configure the firewall as a non-gateway device, don't expect orders of magnitude improvement in speed.
Here's the good news. The benchmark clocked the RVS4000 LAN to WAN data rate at 530 Mbps. Since many disk drive interfaces do not have a sustained data rate this high; you will not see this number when transfering files. I have a couple NAS RAID boxes with gigabit interfaces that top out at around 100-150 Mbps (individually). I can get higher network utilization numbers when doing several files transfers between different network endpoints simultaneously. Network file transfers tend to be very CPU intensive, even when using SCSI hard drives. The CPU intensive part comes from having to package up the data into IP packets and managing the data transfer.
The bottom line is that I am very satisfied with this firewall and its gigabit WAN port. But understand that it needs to be configured properly to optimize its performance and functionality. You don't need to be an engineer or rocket scientist to do this; however, you will need a bit of understanding about IP networking. If you use the RVS4000 as a primary firewall (configuring all of its security features), I suspect it will do that job rather well also.


Click Here to see more reviews about: Cisco RVS4000 4-port Gigabit Security Router - VPN

As broadband speeds increase most 10/100 gateways do not have the power to support those higher data rates, and thus become the bottleneck in the network. The RVS4000 10/100/1000 4-Port VPN Router works at Gigabit speeds to meet the demands of todays networks. It features Linksys proven SPI Firewall with an integrated Intrusion Detection and Prevent System (IDS/IPS). Its built-in 4-port full-duplex 10/100/1000 Ethernet switch can connect up four PCs directly, or additional hubs and switches. The QoS features provide consistent voice and video quality throughout your business. In addition the RVS4000 features a Virtual Private Network (VPN) security engine that creates encrypted IPSec tunnels through the Internet. The IPSec VPN tunnels enable remote users from at home, or on the road to easily, and securely connect to the office network through a typical wired or wireless broadband connection. When used with another RVS4000 or other Linksys VPN router, branch-to-branch connections can be established allowing users in a remote office to connect to the corporate network.

Click here for more information about Cisco RVS4000 4-port Gigabit Security Router - VPN

Read More...

Cisco RV042 4-port 10/100 VPN Router - Dual WAN Review

Average Reviews:

(More customer reviews)I wanted a low-cost VPN solution and had been debating purchasing the Cisco 501 PIX firewall and Netscreen's lowest end 5GT VPN router (which costs $450 + maintenance/support contracts) before discovering this bargain model. Tom's Networking Hardware has a good review about the RV082 holding up with Netscreen's 5GT VPN router in performance tests, which pretty much convinced me to get this Linksys brand. I use the RV082 for our main office and the RV042 as a client in our remote office in mainland China, so I can't say for sure that an RV042-RV042 solution works. Note: If you intend to purchase this model and use it for an international location, however, you do need to purchase a separate 220 volt/1000 mA/12 volt adapter, since the unit only comes with a 110 volt adapter. (Linksys apparently has yet to provide a universal power adapter for this product line.)
I thought the RV042 would be exactly the same as the RV082 except with 4 ports instead of 8. However, I found that the firmware is still a bit behind the RV082 (the RV042 also does not come with an internal PPTP server, though this PPTP server is still not compatible with the Win2000/XP PPTP client). One major benefit of the RV082 is that it comes with a free VPN client called QuickVPN (downloadable in the same section where the RV082 firmware is located). Unlike other Linksys VPN routers, the RV082 using the QuickVPN client avoids the trouble of needing to follow a 16-page procedure for configuring a Win2000/XP client to access the VPN.
The RV082 firmware (v1.1.6.3) contains an "HTTP Service" option that must be enabled to provide QuickVPN support. The QuickVPN client appears to retrieve some VPN server information through https:// requests, which isn't evident unless you look closely at the wget_error.txt located inside the C:\Program Files\Linksys\Linksys VPN Client directory. The RV042 firmware (1.3.1) does not yet support this feature, but their current BETA version (v1.3.3) does (downloaded from linksysinfo.org). Linksys has yet to officially release this firmware, so be forewarned!
The RV units may also be compatible with other VPN brands. We had been using the really flaky Symantec 200 VPN units and managed to get one of the units to negotiate a IPSEC tunnel with the RV042 and RV082. You can use the VPN log feature to see if the negotiation works. Enable the keep-alive option in the Advanced features to help maintain a persistent tunnel too!
Instructions for QuickVPN and setting up the RV042:
1. Upgrade to the latest firmware version (1.3.3 beta off Linksysinfo.org. Additional note: There are reports of problems with the the 1.3.6 beta so have stayed away from using it.)
2. Inside the "Firewall" section, enable the HTTPS service. Make sure to Save Settings too.
3. Inside the "VPN" section, click on the VPN Client Users. Add a username and password that will be used for the QuickVPN Client. Make sure the user that you will be using is selected as Active.
4. Make sure that your client's NAT/firewall has IPSEC passthrough capability turned-on. If you don't, you may see that the QuickVPN client successfully connects but freezes at "Verifying Network".
5. Your client's IP subnet should not conflict with the other remote networks (i.e. Your client subnet should be 192.168.2.0 if your remote networks use 192.168.0.0 or 192.168.1.0)
6. Verify that the IPSEC services is running on your Windows machine.
7. If you are running Windows XP SP2, you need to disable the Windows Firewall. You may also see the connection established but QuickVPN get stuck at the "Verifying Network" message.
A good place to debug your problem is to look at the error logs in the wget_error.txt in the directory where the QuickVPN client is installed (i.e. C:\Program Files\Linksys). The wget program apparently tries to connect via HTTPS to the RV042/RV08 to obtain VPN server information. If the connection is successful, you can see several .conf files downloaded into the same directory.
One another note: Both the RV042 and RV082 have a second WAN port for load-balancing, but I've seen enough reports to stay away from using this feature until Linksys manages to resolves the issues in the firmware.

Click Here to see more reviews about: Cisco RV042 4-port 10/100 VPN Router - Dual WAN

Network connections are the backbone of business connections. One of the Cisco Small Business Routers, the RV042 Virtual Private Networking (VPN) Router supports up to four wired and 50 off-site connections. The latter allows users to connect into your network with secure access to your files and intranet. The RV042 comes with dual Internet ports that can serve as a failsafe system for 24/7 network uptime, or as a secondary connection to a separate Internet provider. Whether they're used for backup or speed boosting, the router's networking hardware will keep bottlenecks away from your network, period.

Click here for more information about Cisco RV042 4-port 10/100 VPN Router - Dual WAN

Read More...

Cisco Wireless-N VPN Firewall - Router Review

Average Reviews:

(More customer reviews)Ok, after waiting for this to come back in stock for a few weeks, I finally got it. I've had Linksys, D-Link, and Netgear network hardware, and wasn't satisfied by them. Yes, I know Linksys is owned by Cisco, but let's face it, if you know networking, you know they AREN'T the same.
Now before I get flack for my title, the setup being easy is relative to your savvy. If you've never heard of VPN, don't know what QOS or SPI stand for and actually mean, this probably isn't the route to take. There are TONS of decent home user level routers that do what you want, and are probably a bit easier to determine what features you want to use or don't want to use. Now, for the rest, this is a decent buy.
Not that I'm a CCNA or above, but I know when I don't get what I want out of a router. I also know that I love to tinker with my tech toys, and this gives me the freedom to giggle like a fool while I fiddle with the features. All in all, thumbs up.
Pros:
* Price. Let's face it; the Cisco Small Business line is a smashing deal. Cisco gear at a decent price? That's not to say that Linksys or Netgear doesn't make their "Professional Series" gear with the same functionality, but I trust Cisco. At ~150 bucks, you can't beat it.
* All the nitty gritty features that everyone wants, but no one wants to setup via the CLI, can be done through the web setup interface. In fact, you have no choice (that being said, don't go nuts on this point until you see Cons).
* Logging. Yes, logging. Basic, but necessary. The routers I've known didn't have logs available.
* Status reports. View how your router's doing. Things going slowly and suspect an attack? You can check your router's logs and the reports to see if things indicate an attack. How many home users can say that?!
Cons:
* No command line option. At least not that I've read about or seen. Correct me if I'm wrong. I'm not sure how viable this is for a business as this is the case.
* Setup can be a bit touchy, though overall it isn't bad. The detecting router portion of it was a bit flaky, but again, not something that was a deal breaker.
Conclusion:
This is a power users router, or an extremely small business router that doesn't have a network administrator/NOC. Not something I'd implement if you have those things and if you need completely customized configurations. It just won't have all the flexibility or power of a higher scale solution.
I'll update this after I use the router more, but thus far, it's neat. We'll see if the Cisco quality came along with the branding on the small business series.

Click Here to see more reviews about: Cisco Wireless-N VPN Firewall - Router

The Cisco RV120W Wireless-N VPN Firewall combines highly secure connectivity - to the Internet as well as from other locations and remote workers - with a high-speed, 802.11n wireless access point, a 4-port switch, an intuitive, browser-based device manager, and support for the Cisco FindIT Network Discovery Utility, all at a very affordable price. The Cisco RV120W Wireless-N VPN Firewall's combination of high performance, business-class features and top-quality user experience takes basic connectivity to a new level.

Click here for more information about Cisco Wireless-N VPN Firewall - Router

Read More...

Cisco RVL200 4-Port SSL/IPsec VPN Router Review

Average Reviews:

(More customer reviews)I want to be able to view and control my IP cameras installed around my home when I am away. The IP camera I have comes with a web interface for realtime viewing from a PC in the local network. This SSL VPN router allows me to connect back to the web interface of my IP camera when I am at work. The out of the box experience is good - I have no trouble in setting it up and connect to the internet with my cable modem. After I changed my default password, created a few user accounts for my family members, and enabled the Remote Management, I put the device into test. First, I have to find the ip address that my cable company assigned to me and the ip address of my camera given by the router - all available from the router administration web interface at http://192.168.1.1. When I was at work the next day, I was able to get to the internet address of my SSL router and connect to my home network within a minute. Just want to share my success story with the community that might have the same need. The QoS feature may come to rescue when I am working from home, using my company's VPN, and my kids are playing bandwidth extensive internet games. I have to see how well it would work.

Click Here to see more reviews about: Cisco RVL200 4-Port SSL/IPsec VPN Router

Get 8% OFF

Click here for more information about Cisco RVL200 4-Port SSL/IPsec VPN Router

Read More...

Cisco RV016 16-port 10/100 VPN Router - Multi WAN Review

Average Reviews:

(More customer reviews)I use this router on our main network of about 40 permanent users and another 20 or so users (clients) that come and go. At any one time it is negotiating 50 to 65 users via DHCP through four 24 port managed switches about ten 4 to 8 port hubs and six WAP's. Clients come and go everyday, some with Mac's others with PC's and I never have to do anything to get them on the internet. In the two years it has been in service I think that I rebooted it once and I'm not positive that it was the problem since I will reboot the modem, switches and router together. Occasionally things do get turned off for maintenance, but looking at the router admin page right now it has been running 54 days straight. I have to say it is much more stable than other small routers that advertise delivering 99 DHCP address's but really can only deliver about 10 without having to use static IP's. It's powerful browser interface lets you manage port bandwidth, port function and port priority easily. Some departments need more or less speed or higher priority. Security notifications via email keep me on top of potential attacks. The effect on speed due to security features was negligible. The "Block WAN request" even keeps our own ISP from seeing us. All these things are simple to setup. As a basic router it is very powerful.
The only short coming that I see is with the load balancing. This seems to really slow the speed significantly. I think that it is just too much for the CPU to handle. My intention was to have two different ISP's for redundancy. As a fix I leave both providers connected but only activate one WAN port at a time. If one WAN goes down I can quickly activate the other WAN port without anyone really being affected. The other ISP is mainly used for FTP anyway.
On the problems with VPN's, we don't use them so I can't comment on that.
In closing, you could spend thousands to get some of the features that facilitate subnets and load balancing, for the price it works very well.
Update: I have since purchased a second RV016 (firmware 2.0.13) with the same solid performance. I've read about some of the problems that others are having and would say that compatibility with other vendors is an issue to consider. Also using switches versus hubs takes some of the load off the routers CPU.
Update 2: We now own three routers without problem. I know that some have complained about customer service and I have to agree it's lacking. But what I would tell less experienced users is that the Sitemap column on the right side of the browser interface has extensive explanations of all the settings. This combined with a little experimentation should get you where you need to be. The file sharing problems that another reviewer had has nothing to do with the router, it's all about the computer settings. Another reviewer commented on customer service asking about the color of the cables. In the early days of DSL and daisy chaining hubs, crossover cables were used and they were generally orange or yellow and will not work with most equipment.

Click Here to see more reviews about: Cisco RV016 16-port 10/100 VPN Router - Multi WAN

WAN VPN Router, formerly part of the Linksys Business Series, is designed and built for small businesses. It provides connection sharing and secure remote access at the heart of your network to allow your employees to access the resources they need to be productive. Multiple WAN ports can be used for load balancing and redundancy. Strong security features include VPN, a proven firewall, and an optional security service that helps fight spam, viruses, and other threats. The built-in switch can connect devices in the office or additional switches.

Click here for more information about Cisco RV016 16-port 10/100 VPN Router - Multi WAN

Read More...

ZyXEL P334 Broadband Router with 4 Port 10/100 Fast Ethernet Switch Review

Average Reviews:

(More customer reviews)This router worked well for our purpose. Had some minor configuration adjustment issues, but overall a good router for the money.

Click Here to see more reviews about: ZyXEL P334 Broadband Router with 4 Port 10/100 Fast Ethernet Switch

Click here for more information about ZyXEL P334 Broadband Router with 4 Port 10/100 Fast Ethernet Switch

Read More...