Showing posts with label cisco. Show all posts
Showing posts with label cisco. Show all posts

Wednesday, July 11, 2012

Cisco-Linksys WRT310N Refurb Wireless-N Gigabit Router Review

Cisco-Linksys WRT310N Refurb Wireless-N Gigabit Router
Average Reviews:

(More customer reviews)
I ordered two of these routers to set up as repeaters in my house. Both routers came very quickly and both routers were in really good condition when I received them. Neither router came with any documentation except for a piece of paper explaining the limited warranty, however, both routers still looked brand new. They do come with a set-up CD, however, the CD is not required if you are familiar with wireless LAN's.
I've flashed both routers with DD-WRT which was very simple to do, and they are both working flawlessly. I didn't even bother using them with the native firmware. DD-WRT all the way!
They do run HOT. I've stuck a pencil under the back end of the router on my desk to see if that helps the air circulate under it a bit better.
I highly recommend this router, especially flashed with DD-WRT firmware.

Click Here to see more reviews about: Cisco-Linksys WRT310N Refurb Wireless-N Gigabit Router



Buy NowGet 65% OFF

Click here for more information about Cisco-Linksys WRT310N Refurb Wireless-N Gigabit Router

Read More...

Wednesday, June 13, 2012

Cisco-Linksys WRT110 RangePlus Wireless Router Review

Cisco-Linksys WRT110 RangePlus Wireless Router
Average Reviews:

(More customer reviews)
Got the Linksys WRT110 because my Netgear WGR614 has been acting funny (will only connect to one wireless device at a time). I chose to do a manual install/configuration of the WRT110 and skipped the disk install completely. Setup the encryption (not WEP, by the way) and other settings, and I had the wireless router working in 10 minutes (it actually took less, but I was tutoring my 17-year old nephew on how to properly install a wireless router, which was why I skipped the disk install version). Afterwards, I searched the available wireless network, found the router SSID, typed in the password for network security (a definite must-do in San Francisco), and I was wirelessly connected! Still connected after 3 days, too.
I gave it a 5-star rating because it worked for me out of the box and without the disk installer. No glitches, and the device was current with the latest firmware. The router is on the second level, and I have decent signal (24-54 Mbps) in all the rooms on the same floor, and a stronger signal than the previous g-router on the other floors (18-24 Mbps with WRT110, -vs- 0-12 Mbps with WGR614). Internet is not affected, since my DSL is only 6 Mbps, anyway.
I picked the WRT110 over the WRT54G2 to try out the MIMO technology. I will update this review in a few weeks after I've completed my testing. Stay posted.
After configuring it as a stand-alone router, I then put it to the test by adding it to my LAN. I have a special configuration, which is a bit more advanced than those of a typical user. I have a D-Link DIR655 (Gigabit Wireless N router) as my DHCP router and is set as N-only mode. I have the WRT110 as wireless-g device hooked to this router which transmits at g-only.
"Why do I have two routers, when the DIR655 is backward compatible with G as well as N?" one might ask. The reason I have it with this configuration is because I have three wireless-N devices and four wireless-G devices. The G devices drops the DIR655 down to wireless-g whenever they are wirelessly connected to the DIR655. So, I have a wireless-G router hooked to the DIR655, the wireless-G computers are connected to the WRT110 and the N devices are connected to the DIR655, and all the devices are working to my preference.
Update:
After having this router for a week, it has stood up to the test and consistenly maintained its connection. My test is basically to bring two laptops (both wireless-G) one floor up and on the other side of the house where the router is located. Both laptops connect fine, and consistently maintain 8-24 Mbps, wheras connection with the old router is still hampered and drops connection every now and then. So either the MIMO function works as noted, or this is just a better router all together. I do not have the WRT54G2 to compare (with and without MIMO), but I'll try to get my hands on those and do a side-by-side comparison.
UPDATE 2 (2009-11-02):
After having this router for over a year, I am still surprisingly very pleased with it. I say "surprisingly" because the reviews for this router on Amazon.com is all over the board. I may have been one of the lucky ones with this router, because 1) I have never lost connection (wired or wireless) with this router, 2) I have never had to restart (in fact, I completely forgot I had this router, since I am running two different wireless routers), and 3) it is small enough to fit on top of a cabinet so that I don't see it. I have three computers (two notebooks, one desktop) connected wirelessly, and two wired PC computers (acting as file servers). It has worked so well for me that I bought one for my father-in-law, and one for my brother. After I set up their WRT110 routers, they have reported NO problems thus far (a year coming up in December). Overall, I am VERY pleased with this router, and fully deserves the initial 5-star rating I gave it.
UPDATE 3 (2010-11-03):
I've had this router for over two years now, and I stand by my initial 5-star review. I have never had to reset/restart this router since my last review a year ago, I've never dropped a connection when connected to this router, I have various things connected wirelessly to this router with no issues (4 desktops, 4 laptops, several iPods, my blackberry and Droid, my HP Ipaq, Iomega ScrenPlay TV Link, and whenever guests come over). I am able to stream video in DVD quality with no stuttering or lag. I do not have an extensive HD video collection, but with the home HD videos, the playback quality depends on the computer I am using, and ranges from perfect to acceptable (which tells me it is a hardware issue related to the computer, and not the wireless router).
I had to post an update because I've been reading some of the recent negative (one-star) reviews, and maybe I got lucky with my unit because it has been as reliable as my D-Link DIR-655 router. One possible explanation is that maybe Cisco-Linksys QC is slipping a bit with the newer products. Another is that the components are different, and not as reliable as the initial batches. Whatever the cause, I know I have been quite happy with this router for over two years.

Click Here to see more reviews about: Cisco-Linksys WRT110 RangePlus Wireless Router

The RangePlus Wireless Router is really three devices in one box. First, there`s the Wireless Access Point, which lets you connect to the network without wires. There`s also a built-in 4-port full-duplex 10/100 Switch to connect your wired-Ethernet devices together. Finally, the Router function ties it all together and lets your whole network share a high-speed cable or DSL Internet connection. With the Linksys RangePlus Wireless Router at the center of your home or office network, you can share a high-speed Internet connection, files, printers, and multi-player games, and run media-intensive applications at incredible speeds, without the hassle of stringing wires!

Buy NowGet 24% OFF

Click here for more information about Cisco-Linksys WRT110 RangePlus Wireless Router

Read More...

Monday, May 21, 2012

Cisco-Linksys WSB24 Wireless-B Signal Booster Review

Cisco-Linksys WSB24 Wireless-B Signal Booster
Average Reviews:

(More customer reviews)
The reality of WiFi is that just about everyone I know is not getting as solid a signal as they'd like. I've been frustrated by dead spots in the house, and I'm sure we've all done strange "rain dances" with our notebooks, cables, antennas, etc. to try to improve the signal.
However, my WiFi network did not seem as zippy as my Ethernet when using our cable modem, even though the bandwidth of both networks dwarfs the cable modem. Well, instantly after installing the booster, I got noticeably better response in a room where the signal used to be so weak that Linksys' own utility would show no signal strength (even though I could surf from there).
The WSB24 is trivial to install (180 seconds and that was because I didn't know you had to push the cable onto the connector pretty firmly). If you were a LinkSys pioneer and bought the early access points, you owe it to yourself to upgrade with this booster.

Click Here to see more reviews about: Cisco-Linksys WSB24 Wireless-B Signal Booster

The Linksys wireless signal booster piggybacks onto your Linksys wireless access point (or wireless access point router) to increase the effective range and coverage area of your 802.11b network. The added signal strength also helps speed up your close-range communications, because every packet comes through "loud and clear," reducing retransmissions that are due to reception errors.
To install, just stack the Linksys wireless signal booster on your access point, move the antennas to the booster, and attach the booster's twin cables to the access point--no drivers or modifications to your setup are necessary.
The Linksys wireless signal booster saves wiring costs and helps build corporate wireless infrastructure by driving signals even into those distant, reflective corners and hard-to-reach areas. And it's perfect for covering large areas in warehouse environments, public spaces, wireless hot spots, and outdoor venues--anywhere you need extra coverage for your wireless LAN. NOTE: The wireless signal booster is certified by the FCC for use only with the Linksys wireless access point, model number WAP11 and the Linksys wireless access point router, model number BEFW11S4.


Buy Now

Click here for more information about Cisco-Linksys WSB24 Wireless-B Signal Booster

Read More...

Saturday, May 5, 2012

Cisco-Linksys WRE54G Wireless-G Range Expander - REFURBISHED Review

Cisco-Linksys WRE54G Wireless-G Range Expander - REFURBISHED
Average Reviews:

(More customer reviews)
There was a lot of information out there about this product but I decided for $25 (Refurbished) I'd try it. Plugged it in, hit the "auto" button and away it went. It boosted the signal in an outbuilding from "Low" to "Excellent" and seems to be working just fine. I ignored the directions and the CD that came with it and didn't do any of the techno stuff like configuring the Host name, etc, etc. It just worked!

Click Here to see more reviews about: Cisco-Linksys WRE54G Wireless-G Range Expander - REFURBISHED



Buy Now

Click here for more information about Cisco-Linksys WRE54G Wireless-G Range Expander - REFURBISHED

Read More...

Sunday, April 15, 2012

TRENDnet 300Mbps Wireless N PoE Access Point TEW-638PAP (Black) Review

TRENDnet 300Mbps Wireless N PoE Access Point TEW-638PAP (Black)
Average Reviews:

(More customer reviews)
We bought 3 of these to use on the amenities floor of a hirise condo building in Chicago. We bought a PoE Switch and then had a Cat5 run to these locations. The access points provide plenty of coverage. While the other reviewer is correct that its not a gigabit port, so speeds are limited to 100mbps, its more than sufficient right now, and for the price, its not worth spending more on gigabit at this point. If we need to upgrade in the future, prices will drop by then for those.
Easy to set up and install. Again, these are getting heavy use by many users each day -- probably 100 users per day -- and we have run into no issues 4 months after installation.
WARNING: The AP's do not use 3 watts as stated on the specs. They clearly use about 14 watts each when using with a PoE switch.

Click Here to see more reviews about: TRENDnet 300Mbps Wireless N PoE Access Point TEW-638PAP (Black)



Buy Now

Click here for more information about TRENDnet 300Mbps Wireless N PoE Access Point TEW-638PAP (Black)

Read More...

Sunday, April 1, 2012

NETGEAR KWGR614 Open Source Wireless-G Router Review

NETGEAR KWGR614 Open Source Wireless-G Router
Average Reviews:

(More customer reviews)
I bought this router in 2006 and it's working fine. I have 3 computers and i don't have any problem connecting between them and with the internet connection.

Click Here to see more reviews about: NETGEAR KWGR614 Open Source Wireless-G Router

The NETGEAR KWGR614 Open Source Wireless-G Router is an 802.11g wireless router that includes open-source code for Linux developers and enthusiasts. This enables customization and the ability to create firmware for specialized applications.
Wired and Wireless Connectivity The KWGR614 functions as a 802.11g wireless access point, supporting speeds up to 54 Mbps. It is backwards compatible with 802.11b networks. There are two detachable 2dBi antennas included for greater flexibility.
The device also has a built-in switch with four 10/100 Mbps auto-sensing Ethernet ports. The KWGR614 has up to twice the WAN-to-LAN throughput of other home routers for greater performance.
High-Class Security The KWGR614 supports a Stateful Packet Inspection (SPI) firewall that protects against Denial of Service (DoS) attacks. The wireless portion of the router supports WPA-PSK and WPA2-PSK encryption, as well as 40/64-bit and 128-bit WEP encryption.
Open Source Extensibility Open-source code is provided for Linux developers and enthusiasts which enables customized firmware for specialized applications. An Open Source Developers Guide is included.
The NETGEAR KWGR614 Open Source Wireless-G Router is backed by a 1-year warranty.
What's in the Box KWGR614 Open Source Wireless-G Router, setup CD, power adapter, ethernet cable, warranty/support information card.

Buy Now

Click here for more information about NETGEAR KWGR614 Open Source Wireless-G Router

Read More...

Sunday, March 18, 2012

TP-Link WL TL-WR340G 54M 4PT Routr Review

TP-Link WL TL-WR340G 54M 4PT Routr
Average Reviews:

(More customer reviews)
I just got this router today, with amazon prime I got it here in two days.
Pros it is running my wii for netflix and my lap top wireless quickly right now.
Cons: only comes with a mini disk for windows installation and I have a Mac . I had to call the help line and get a instructions, but the operator was very helpful and it only took fifteen minutes on the phone for me install.

Click Here to see more reviews about: TP-Link WL TL-WR340G 54M 4PT Routr



Buy NowGet 14% OFF

Click here for more information about TP-Link WL TL-WR340G 54M 4PT Routr

Read More...

Friday, March 16, 2012

Cisco Aironet 1131AG - wireless access point ( AIR-LAP1131AG-A-K9 ) Review

Cisco Aironet 1131AG - wireless access point ( AIR-LAP1131AG-A-K9 )
Average Reviews:

(More customer reviews)
I don't understand why people purchase enterprise level devices like this access point for their homes or apartments and complain when it doesn't work out of the box. This 1131AG is meant to be used in a networked environment, specifically in combination with a WLAN controller. When the WLAN controller is configured properly, this 1131AG will auto-configure itself as soon as it is given ethernet and broadcast all SSID's on the controller. (Note that the automatic behavior is unique to this Lightweight model, AIR-LAP1131AG - be careful when ordering.) The range on this unit is superb, and like most Cisco products, it is extremely reliable and durable. It comes with a variety of mounting plates, a bag of machine screws, power adapter (though PoE is preferred due to the size of the brick) and a user guide. I would have liked if they included wood or drywall screws because 99% of the time I am installing these on walls, but that is a small complaint. Overall this is one of the better WAP's out there for the small to medium sized business. Together with a WLAN controller like the Cisco 2106 you will enjoy a very robust and reliable WiFi network.

Click Here to see more reviews about: Cisco Aironet 1131AG - wireless access point ( AIR-LAP1131AG-A-K9 )



Buy NowGet 30% OFF

Click here for more information about Cisco Aironet 1131AG - wireless access point ( AIR-LAP1131AG-A-K9 )

Read More...

Monday, March 12, 2012

Cisco-Linksys WRT160NL Wireless-N Broadband Router with Storage Link (Compatible with Linux) Review

Cisco-Linksys WRT160NL Wireless-N Broadband Router with Storage Link (Compatible with Linux)
Average Reviews:

(More customer reviews)
I've had several routers over the years, and this one is the best so far. Range is great, speed is great, but best of all is the setup. Has a CD that makes it very easy, and when you are done it gives you a diagram of your entire network, including the names of each computer. I've set up several routers over the years, so I know what I'm doing, but who wants to spend time messing with it? I believe just about anyone could do this one. I've had it about a month, and I love it.
Update: I found out that my download speed was cut by 85% to my HARDWIRED computer when the ethernet cable was routed through the router (which it has to be) and then to my desktop computer. I found this out accidentally when checking speeds, and then got on the Linksys website and ask for help. I got a response and they had me change some obscure (MTU) settings (which I still don't understand), and it fixed the problem. My issue is, NOWHERE in the instructions does it even hint that you might need to do this.
Otherwise, the router works fine. But if you get it, check the download/upload speeds before and after the installation.

Click Here to see more reviews about: Cisco-Linksys WRT160NL Wireless-N Broadband Router with Storage Link (Compatible with Linux)

The Wireless-N Broadband Router with Storage Link is really four devices in one box.First, there's the Wireless Access Point, which lets you connect to the network without wires.There's also a built-in 4-port full-duplex 10/100 Switch to connect your wired-Ethernet devices together.The Storage Link feature lets you connect a hard drive or flash-based USB storage device directly to your network to easily add gigabytes of storage.Access your music, video, or data files from anywhere within your network.Finally, the Router function ties it all together and lets your whole network share a high-speed cable or DSL Internet connection.

Buy Now

Click here for more information about Cisco-Linksys WRT160NL Wireless-N Broadband Router with Storage Link (Compatible with Linux)

Read More...

Sunday, March 4, 2012

Buffalo Technology AirStation High Power N600 Gigabit Dual Band Wireless Router & AP WZR-HP-AG300H (Black) Review

Buffalo Technology AirStation High Power N600 Gigabit Dual Band Wireless Router and AP WZR-HP-AG300H (Black)
Average Reviews:

(More customer reviews)
I purchased this router because my wrt160n router from Cisco kept dropping connections. Setup was easy and fast. I have 2 laptops, TV through a game receiver and a Sony blue ray player all connected up. I had no trouble connection them. The game adapter would not work with my Cisco. I am getting maximum speed on down and up loads about 20% more than the Cisco. I have yet to have any issues. I would definitely recommend this router at this great price.

Click Here to see more reviews about: Buffalo Technology AirStation High Power N600 Gigabit Dual Band Wireless Router & AP WZR-HP-AG300H (Black)

Buffalo's AirStation Nfiniti Wireless-N High Power Dual Band Router & Access Point WZR-HP-AG300H is a versatile dual band solution, ideal for the home and small office environments. Offering simultaneous wireless operation on both 2.4 GHz and 5 GHz bands, the WZR-HP-AG300H is perfect for streaming HD movies, music and e-mailing from multiple devices at the same time. Coupled with High Power technology, including an onboard power amplifier and optimized antenna, the WZR-HP-AG300H provides exceptional range and increased performance at range. With five gigabit ports and wireless speeds up to 300 Mbps on each band, the WZR-HP-AG300H upgrades any existing wireless connection and provides greater coverage than traditional 802.11n. Additionally, WZR-HP-AG300N can be configured as an access point to create a wireless network on an existing network or two units can be used to create a dedicated, high-performance Wireless-N bridge or repeater, great for extending the range of existing wireless networks.

Buy NowGet 50% OFF

Click here for more information about Buffalo Technology AirStation High Power N600 Gigabit Dual Band Wireless Router & AP WZR-HP-AG300H (Black)

Read More...

Friday, February 24, 2012

D-Link Xtreme N Duo Wireless Bridge/Access Point DAP-1522 - Wireless access point - external Review

D-Link Xtreme N Duo Wireless Bridge/Access Point DAP-1522 - Wireless access point - external
Average Reviews:

(More customer reviews)
I needed a wireless bridge so that I could move my printer to a room with no jacks. The D-Link DAP-1522 had great reviews, and a bridge should work with any environment. Not this one.
* The router's wireless settings can not be configured without Internet Explorer (a Linux user like me has to fire up a VM).
* The bridge would not relay DHCP responses from the wireless network to the attached wired devices. D-Link support says that is because I am using a Linux router (though it shouldn't make a difference). If I configured static IP addresses on my wired devices, they worked great.
* D-Link has not released new firmware in over a year, so I doubt that these problems will get fixed.
* D-Link support was "lacking" (and don't get me started on Office Depot's awful return policy).
* Custom firmwares like dd-wrt or tomato won't work on this device, so there is no easy way to correct these problems.
In short, I can get it to do what I want, but it's a lot of hassle.

Click Here to see more reviews about: D-Link Xtreme N Duo Wireless Bridge/Access Point DAP-1522 - Wireless access point - external



Buy Now

Click here for more information about D-Link Xtreme N Duo Wireless Bridge/Access Point DAP-1522 - Wireless access point - external

Read More...

Monday, February 13, 2012

Linksys Wireless-N Broadband Router WRT160N - Wireless router - 4-port switch - 802.11b/g/n (draft) - desktop Review

Linksys Wireless-N Broadband Router WRT160N - Wireless router - 4-port switch - 802.11b/g/n (draft) - desktop
Average Reviews:

(More customer reviews)
I've given up on this product. The installation CD's first window was a mystery on what process to select since none showed as "installation". Called toll free number. Answered eventually (after enduring endless menu) by person who clearly spoke English as a second language. 30 min. on the phone later, I just gave up,thanked the guy for his time and ended the call. At one point I wondered if my call had prompted a hidden camera joke where eventually someone would tell me a joke had been played on me and the person I was speaking with really was Not a tech support rep etc.etc. I was absolutely worn out after dealing with Linksys's customer support for new installations. I had to repeat every sentence the guy said in an effort to confirm his instructions and then steps later, he would change his mind and have me un do something he had instructed me to do previously. After 30 min. on phone I questioned what to do with an included cable that he had not mentioned.When he told me it should have been installed many steps prior, I knew it was time to stop this torture. It was truly unbelievable ! End result: I am donating this unit to a local youth home,and buying another brand highly recommended to me by my neighbor who installed a wireless network in his home without any calls to tech support or any problems.I read scathing reports about the poor installation software on various Linksys products and now I am a believer. However poor the installation CD is, live tech support is worse....worthless, in fact.If you are not tech savy, I can't recommend using this product based on my installation misadventure.

Click Here to see more reviews about: Linksys Wireless-N Broadband Router WRT160N - Wireless router - 4-port switch - 802.11b/g/n (draft) - desktop



Buy Now

Click here for more information about Linksys Wireless-N Broadband Router WRT160N - Wireless router - 4-port switch - 802.11b/g/n (draft) - desktop

Read More...

Thursday, February 9, 2012

Dell TrueMobile 2300 Wireless Broadband Router, Model WX-5565D Review

Dell TrueMobile 2300 Wireless Broadband Router, Model WX-5565D
Average Reviews:

(More customer reviews)
I bought that router because the cable modem from Comcast is crap, so I need a router to share the internet connection with other computers at home.
I am so glad that router is cheap because it's not an newest model, but it works well. It's not 802.11n but it's enough for me at this moment.

Click Here to see more reviews about: Dell TrueMobile 2300 Wireless Broadband Router, Model WX-5565D



Buy Now

Click here for more information about Dell TrueMobile 2300 Wireless Broadband Router, Model WX-5565D

Read More...

Saturday, February 4, 2012

Cisco 3-Line Unified Communications 500 Series IP Phone, SPA 9000 Voice System, Hosted IP Telephony (SPA 303) Review

Cisco 3-Line Unified Communications 500 Series IP Phone, SPA 9000 Voice System, Hosted IP Telephony (SPA 303)
Average Reviews:

(More customer reviews)
I had used a soft phone for the last 6 years for work, and it worked well, but the watching apps load so the phone doesn't stutter or not downloading anything while talking, was getting old.
I needed a phone that would be simple to set up and would go straight to my soft switch provider sometimes called DID provider.
Just received it yesterday, and this thing is great. Good quality plastics, weight, size, buttons. For 100 bucks this thing is great value. The menus are easy to navigate, and the update firmware cannot get easier, no SFTP or ssh to muck around with. The webserver part is great as you can program every aspect of the phone. call forwarding is especially easy. The only thing that doesn't work when you go with SIP is the MOH, and the VM indicator light but who cares. Didn't even port forward on the router and it works fine.
Sound quality wise this is so much better than a softphone. Speakerphone volume is loud, and clear, handset is great.
So if you want the latest and greatest from Cisco, and have a small business, get this phone.

Click Here to see more reviews about: Cisco 3-Line Unified Communications 500 Series IP Phone, SPA 9000 Voice System, Hosted IP Telephony (SPA 303)

Cisco Small Business Pro - VoIP phone - SIP, SIP v2, SPCP, 3 Line IP Phone with Display and PC Port

Buy NowGet 39% OFF

Click here for more information about Cisco 3-Line Unified Communications 500 Series IP Phone, SPA 9000 Voice System, Hosted IP Telephony (SPA 303)

Read More...

Saturday, January 28, 2012

Siemens SS2604 4-Port Ethernet DSL/Cable Router with Print Server Review

Siemens SS2604 4-Port Ethernet DSL/Cable Router with Print Server
Average Reviews:

(More customer reviews)
Worked fine for a couple years - a lot better than my previous (different brand) router - then a few days ago (May 2005), it just stopped working.
Now the Status and Print Err lights remain red (I never had a printer connected to it), and the Power and Print Act lights remain green, and any ports with computers connected just flash slowly. I tried holding in the reset button for a long time, and I even tried letting is sit completely unplugged for a few days, then resetting again, but it is still dead.
I have my router and cable modem connected to my UPS, and there were no power problems the day, so I don't think it was a power surge that caused it to die.
I see that one other person had this exact same problem. I would love to know what the problem is, so contact me if you have an idea (It's pretty simple to find my web site).
Fortunately, I already had another good router (3rd brand) to replace it with, so I'm still online. And I just bought an additional router (4th brand), at a very good sale price, to have as a backup.

Click Here to see more reviews about: Siemens SS2604 4-Port Ethernet DSL/Cable Router with Print Server



Buy Now

Click here for more information about Siemens SS2604 4-Port Ethernet DSL/Cable Router with Print Server

Read More...

Tuesday, January 24, 2012

Ap 541N Wireless Access Point Review

Ap 541N Wireless Access Point
Average Reviews:

(More customer reviews)
Cisco had a lot of bugs with early firmware, since this is their first Linux based access point. However, if you run their latest firmware (1.9 as of this writing), the device is rock solid. I replaced some older 2.4GHz-only access points with the AP541N, and so far, it's been great. I'm running this in 5.0GHz mode (802.11a/n) due to local interference on the 2.4GHz band. Note that this access point, while claiming to be dual-band, has only one radio. This means that it can only operate one of the frequencies at any given time, so you can run it in 2.4GHz mode *or* 5.0GHz mode, not both concurrently. If you still have older 2.4GHz clients (802.11b/g), you will need to either run this AP in 2.4GHz mode, or run a second AP to support the second frequency.
For advanced users, this device has a couple neat features. First, it can run a number of SSIDs concurrently, each with different security models, and associate them with VLAN tags. On our network, that enables us to run a "Guest" network with limited access to resources, along side our "Internal" network. It can also replicate it's config to multiple AP541N access points within the same network, enabling you to manage them as a single mesh, without having to purchase the complex (and much more expensive) managed wireless infrastructures. FInally, it runs the Linux OS on a Cavium MIPS CPU, and has a full SSH daemon and busybox shell environment, so I'm sure there's some creative modifications that an advanced user could run on this access point.

Click Here to see more reviews about: Ap 541N Wireless Access Point



Buy NowGet 32% OFF

Click here for more information about Ap 541N Wireless Access Point

Read More...

Tuesday, January 17, 2012

Cisco WAP2000 Wireless-G Access Point - POE Review

Cisco WAP2000 Wireless-G Access Point - POE
Average Reviews:

(More customer reviews)
I bought this product to provide secure wireless services to our company network. I was pleasantly surprised that it has support for multiple SSIDs with tagged VLAN support (useful for creating a "guest" network for visitors, as well as a separate secure internal network). It supports WPA2-Enterprise, which I'm using together with Windows Server 2003 IAS to allow domain users to be authenticated to the network using their windows login automatically. I was fully expecting problems deploying this somewhat bleading-edge feature, but so far it's worked perfectly (aside from the hassles associated with Microsoft's poor group policy support for WPA2 in XP Pro). The unit has never requiring a restart since I installed it. The physical hardware seems well made also. I'm not using the POE support, because the range on this AP is good enough to allow it to sit in our phone room and cover the entire floor. Overall, this product feels like it's benefited from the Cisco influence, unlike some of Linksys' other recent efforts.

Click Here to see more reviews about: Cisco WAP2000 Wireless-G Access Point - POE

The WAP2000 is a Wireless Access Point ideal for small businesses that want to expand their existing wired networks or create new wireless networks for the workforce or guests. It features RangeBooster technology that is compatible to standard 802.11g but with a range up to two times farther and throughput by up to 35 faster. Unlike ordinary wireless technologies that are hampered by wireless signals that reflect off walls, ceilings, and other objects, RangeBooster uses these multiple signals with two smart receivers at each end (router or access point and client adapter) to boost range and throughput speeds. As a result, a RangeBooster solution reduces or eliminates wireless signal deadspots in offices and other buildings so users can connect to the network in more areas. The WAP2000 comes with 3 dBi antennas for increased power, also helping to extend the range of the Access Point.

Buy Now

Click here for more information about Cisco WAP2000 Wireless-G Access Point - POE

Read More...