Showing posts with label d-link. Show all posts
Showing posts with label d-link. Show all posts

Sunday, July 15, 2012

D-Link DAP-1562 Media Streaming Kit Selectable Dual Band, 11n, 600Mbps Review

D-Link DAP-1562 Media Streaming Kit Selectable Dual Band, 11n, 600Mbps
Average Reviews:

(More customer reviews)
My file server PC and my home theater PC are at nearly opposite ends of my home - separated by a floor and 5 interior walls. Over the past 3 years I've tried multiple options to get fast enough speeds to stream 1080p HD video content between the two. I've been limping along by using a Buffalo 802.11g Ethernet Converter combined with a high-gain antenna (the BNC connection made it trivial to swap out the factory provided antenna) connecting to a very solid router - the Linksys WRT600N 802.11n dual-band router. This gave me about 10-12Mbps sustained data transfer speeds. Just a tad bit slower than my internet connection speed. Sigh.
I was about to give up and pay through the nose to get Cat 6 Ethernet installed, when I came across the current generation of 802.11n 5 Ghz media bridges. I considered getting the D-Link DAP-1522 802.11n Wireless Bridge but saw the so-so reviews and noted that it had no external antenna. Given the distance involved for my network, I doubted that the DAP-1522 would do me much good without a high gain antenna. I then saw the DAP-1562 Media Streaming Kit which claimed "4x4 spatial streaming WLAN and data rates up to 600 Mbps". So what the heck, I took a $300 gamble.
It worked out. Without fiddling with any specific positioning or orientation I'm getting 112 Mbps sustained between my PCs. Certainly lower than the peak speed promised, but understandable given the distance in this case.
This kit comes with two units (hence the cost). One acts as the access point and the other as the bridge. Setup was quite easy - though I was forced to use the enclosed CD to make SSID changes. Out of the box they are configured to work only in the 5 Ghz 802.11n range, which is exactly what I wanted (least interference and max speed).
Note that there is only a single Ethernet port on each box. The AP plugs into an existing router or switch, so that's fine. However I would have appreciated another port or two on the bridge unit. I'm assuming I can add a switch to get a PS3/XBox/Wii and the HTPC all wired up at the same time, but I haven't yet tested that.
There are 4 antennae on each unit. They rotate individually, but can not be removed / replaced with high gain versions.

Click Here to see more reviews about: D-Link DAP-1562 Media Streaming Kit Selectable Dual Band, 11n, 600Mbps



Buy NowGet 21% OFF

Click here for more information about D-Link DAP-1562 Media Streaming Kit Selectable Dual Band, 11n, 600Mbps

Read More...

Thursday, July 12, 2012

Windy31 USB-Type Portable Wireless Gateway to Combine Wireless Lan card, Wireless AP and Wireless Router (Black) (Retail Packaged) Review

Windy31 USB-Type Portable Wireless Gateway to Combine Wireless Lan card, Wireless AP and Wireless Router (Black) (Retail Packaged)
Average Reviews:

(More customer reviews)
I like to get out of my office and work out on the counter with my own personal laptop. Our IT guys were miffed that I had installed a traditional wireless router to allow me to do this because, with only one NIC card, it put the desktop as well as the laptop behind a NAT address - and so IT couldn't "see" the company desktop. Now, instead, I use the Windy31. Since it just looks like one of those big, old, first generation, USB drives, no one knows it is a router, and the company desktop can be seen by IT (so they're happy). But, I can get a very good wireless connection through the Windy31 at 50ft. or so from my office. When I go home, I just unplug the big, old "USB drive". I very pleased with this product.

Click Here to see more reviews about: Windy31 USB-Type Portable Wireless Gateway to Combine Wireless Lan card, Wireless AP and Wireless Router (Black) (Retail Packaged)



Buy NowGet 40% OFF

Click here for more information about Windy31 USB-Type Portable Wireless Gateway to Combine Wireless Lan card, Wireless AP and Wireless Router (Black) (Retail Packaged)

Read More...

Monday, July 9, 2012

D-Link DIR-855 Xtreme N Duo Dual Band Draft 802.11n Media Router Review

D-Link DIR-855 Xtreme N Duo Dual Band Draft 802.11n Media Router
Average Reviews:

(More customer reviews)
D-Link DIR-855 Xtreme N Duo Dualband Draft 802.11n Media Router
Per another customer, here's the differences in the Extremes:
The following will likely save you a couple of hours of research...
The DIR-655 is single-band (2.4GHz).
The DGL-4500 is dual-band (2.4GHz and 5GHz), however it only uses one band at a time. You choose which band, manually, in the configuration. It doesn't choose the best band in real-time, or anything like that.
The DIR-855 is dual-band (2.4GHz and 5GHz) and uses both bands at the same time.

Click Here to see more reviews about: D-Link DIR-855 Xtreme N Duo Dual Band Draft 802.11n Media Router

D-Link DIR-855 Xtreme N Duo Dual Band Draft 802.11n Media Router

Buy Now

Click here for more information about D-Link DIR-855 Xtreme N Duo Dual Band Draft 802.11n Media Router

Read More...

Wednesday, June 20, 2012

D-Link DWL-520 Wireless PCI Adapter, 802.11b, 11Mbps Review

D-Link DWL-520 Wireless PCI Adapter, 802.11b, 11Mbps
Average Reviews:

(More customer reviews)
The following answer on the D-Link tech support site says it all: "The DWL-520 requires a PCI 2.2 compliant motherboard (3.3v) in order to function. If your PCI slot is 2.1 compliant, or if the PCI slot is using 5v, then the card won't be detected by Windows and unfortunately will not work." And how will you know if you have a PCI 2.2 compliant board? Essentially, you won't, until you try the card or dig deep into the specs on your computer's motherboard. I have a very reputable ASUS Pentium III motherboard, that won't recognize this card. Very frustrating...

Click Here to see more reviews about: D-Link DWL-520 Wireless PCI Adapter, 802.11b, 11Mbps



Buy Now

Click here for more information about D-Link DWL-520 Wireless PCI Adapter, 802.11b, 11Mbps

Read More...

Tuesday, June 5, 2012

SMC SMCWGBR14-N Barricade N ProMax Draft 11n Wireless Gigabit Broadband Router Review

SMC  SMCWGBR14-N Barricade N ProMax Draft 11n Wireless Gigabit Broadband Router
Average Reviews:

(More customer reviews)
I'm a Network Engineer and I have a habit of over doing it with my home equipment. I was limping along with my old Linksys router. The Barney of home networking equipment. My Vista laptop did not get along well with it at all. Refusing to upgrade convinced that N was just a stepping stone and the moment I bought a new router they'd release a new better product that actually lived up to the hype. However I was to the point that I would only use the internet if I was wired in. I did a lot of research and I finally chose the SMC Barricade Router. I installed the Barricade yesterday and I was shocked at how many features this router really came with in the Admin console. And my wifi connection is fast, 100% reliable and my laptop hasn't kicked me off of the internet since the moment I turned the router on. Signal...100% excilenta all of the time. Buy it, you'll love it. Stay away from Linksys you deserve better. The only thing that could make me happier with the Barricade is if the built in Gigabit switch had more than 4 ports. I have a few ethernet network storage drives and I'd like to have some extra slots for other devices. But 4 is standard with wifi routers. Thank you SMC for fixing my relationship with Wifi. It has really lived up to the good reviews. Check out Cnet.com for a good run down on it's features.

Click Here to see more reviews about: SMC SMCWGBR14-N Barricade N ProMax Draft 11n Wireless Gigabit Broadband Router



Buy NowGet 35% OFF

Click here for more information about SMC SMCWGBR14-N Barricade N ProMax Draft 11n Wireless Gigabit Broadband Router

Read More...

Thursday, May 31, 2012

Siemens SpeedStream Wireless DSL/Cable Router (SS2624) Review

Siemens SpeedStream Wireless DSL/Cable Router (SS2624)
Average Reviews:

(More customer reviews)
I have used this router for three years and it works great, except ...
If you use VPN and want it to continue to function, don't upgrade your firmware to Release 10 (released in late 2003). Otherwise, you will be like me with a crippled router.

Click Here to see more reviews about: Siemens SpeedStream Wireless DSL/Cable Router (SS2624)



Buy Now

Click here for more information about Siemens SpeedStream Wireless DSL/Cable Router (SS2624)

Read More...

Tuesday, May 29, 2012

TRENDnet 300 Mbps Wireless N Gigabit Router TEW-639GR (Black) Review

TRENDnet 300 Mbps Wireless N Gigabit Router TEW-639GR (Black)
Average Reviews:

(More customer reviews)
I've spent the last few months dealing with a horrible wireless n router so I decided to go with this one. I also have a TREDNnet wireless n gaming adapter and it's been fantastic so far. Anyways, this router runs cool even though I've been using multiple connections at the same time and using tons of traffic. My PC shows that I average 250Mbps and I see it peak at 300 constantly so the speed is as advertised. I have it running in mixed mode. It only took about 10 minutes to set the router up out of the box. Once I plugged in my cable modem and my pc it automatically configured the connection and I just had to log in and configure the wireless portion and security. In the 10 minutes I also configured my DDNS and my wireless IP Cameras to work with the router. It's a super easy interface.....pretty much the same as any other router you can buy. When saving settings the reboot only took a few seconds and always went back into the setup. Most routers clunk out and you have to reset and log back in manually. I could go on and on but to keep this short I'd have to say that this router is awesome and it does EXACTLY as advertised. I've used most of the major brands of routers and I can't say much for most. It's very difficult to find a good reliable product but I think I've gotten lucky with this one. Don't believe hype or buy something because you've heard the name before. The only other router I've ever been happy with was a Viewsonic believe it or not. That thing was rock solid and never gave me a single problem. If anything changes I will post it....otherwise you can count on this router. I love how people here are claiming they have advanced knowledge but can't set this router up. It's really very very simple just follow the quick setup in the manual.
*UPDATE 1/17/10*
Still no reset needed! I've been using tons of data with multiple devices. As a matter of fact Netflix is streaming to my living room right now. I have a torrent downloading on this pc @ 500kB/s and there are no hiccups. Just solid lightning fast connections!
*UPDATE 3/14/10*
Still no reset needed. I'm running in Mixed Mode and you MUST run 20/40 on the Bandwidth to get full speed. That must be the problem with others but this is standard with any N router.

Click Here to see more reviews about: TRENDnet 300 Mbps Wireless N Gigabit Router TEW-639GR (Black)



Buy NowGet 51% OFF

Click here for more information about TRENDnet 300 Mbps Wireless N Gigabit Router TEW-639GR (Black)

Read More...

Saturday, May 5, 2012

D Link AirPlus DWL-900AP+ Wireless 22MBPS Access Point Review

D Link AirPlus DWL-900AP+ Wireless 22MBPS Access Point
Average Reviews:

(More customer reviews)
I bought another one of these to repeat my existing 900AP+'s signal to extend the range of my wireless network. It works great since I set it all up 2 weeks ago. I am not able to go all the way out to my backyard by the pool and still have Internet access on my laptop. This is very convenient when swimming or just laying and you get the urge to look something up on the Internet, but usually you don't because the PC is so far away. Not anymore. I am now able to bring my laptop out with me and maybe watch a DVD outside while I BBQ or just drink with my friends.
The repeater function looks like it only repeats other D-Link products. It also brings the speeds down to 11Mbps when you are connected to the network via the repeater. If you can get a signal with the main AP, then you are able to maintain your 22Mbps speeds.
Everything else about this AP has worked great for me as well and I'd highly recommend it.

Click Here to see more reviews about: D Link AirPlus DWL-900AP+ Wireless 22MBPS Access Point

The D-Link AirPlus DWL-900AP+ can be configured to perform in any one of four modes--as a wireless access point, as a point-to-point bridge with another access point, as a point-to-multipoint wireless bridge, or as a wireless client. It also includes an embedded DHCP server that, once enabled, will automatically assign IP addresses to wireless clients. It also eliminates the need for a separate DHCP server on the network. This unique feature is ideal for quickly creating a wireless local area network in offices or other workplaces, or a temporary network at trade shows or other events.
The DWL-900AP+ also features 256-bit WEP encryption for a higher level of security for your data and wireless communications.
The DWL-900AP+ is fully compatible with the IEEE 802.11b standard, making it interoperable with all existing 802.11b-compliant devices. But unlike standard 802.11b access points, its data transfer rate can be up to 20 percent faster. When your wireless network is comprised of other D-Link AirPlus products, such as the DWL-520+ wireless PCI adapter, the DWL-650+ wireless CardBus adapter, and the DI-614+ wireless router--transfer rates can be as high as 22 Mbps.

Buy Now

Click here for more information about D Link AirPlus DWL-900AP+ Wireless 22MBPS Access Point

Read More...

Thursday, May 3, 2012

D-Link DI-714P+ Wireless Cable/DSL Router, 4-Port Switch, Prnt Server, 802.11b, 22Mbps Review

D-Link DI-714P+ Wireless Cable/DSL Router, 4-Port Switch, Prnt Server, 802.11b, 22Mbps
Average Reviews:

(More customer reviews)
Setup: fairly straightforward. There is a "wizard" setup for those who don't like to go through every single option screen. The screen navigation is laid out in a simple, but not intuitive manner - it takes a few moments to realize the buttons on the left change with tab options at the top, but the buttons on the left don't change if there are multiple screens on the right (like "next page" or a button to press). There is no "go back a page" - they expect you to hit the button to the right that is still visible. All my complaining about that aside - it's as easy, if not easier, to navigate and find settings than both netgear and linksys.
Print server: no setup available on the router - it either is or is not plugged in. Software setup for PC works fine. Did not try it with linux yet.
Wireless: finally, something that works with 64/128 bit WEP. Netgear never worked. Linksys was so-so. This works. NOTE: For those who want to limit ACCESS to the WIRELESS by MAC ADDRESS - this unit cannot do it. It can limit by MAC to the INTERNET, but that will also limit who can attach to the unit, both with wireless and with a physical connection. Most other units only use this filter to limit access to the wireless portion. If used, you have to put in all the machines connecting to it - both wireless and physical....
Firewall: Syslog, email logs available. Nice. SPI works. DMZ support. Passthrough ports available. Works great with my nortel VPN client (this is always a good test of PPTP and so on).
FIRMWARE NOTE: I had the hardest time getting this thing to work with windows terminal services. No matter what setting I used, it would lock up then drop the connection until I rebooted the router (software reboot). Some settings would go longer, but I could get it to lock up within 2 minutes. Nothing seemed to fix it - a few people have reported this on the internet, but since most people aren't using the terminal services part of windows on a regular basis - they would never know it.
The fix was to load the 1.22 firmware, not the 1.23 that came with it. This REMOVES the 802.1X authentication tab (some type of shared radius key BS - if you want radius support, get a REAL wireless device) and it removes the 4X mode for the B+ series of wireless adapters (which I do not have anyway).
TO LOAD FIRMWARE: you would need to run either executable (one for MAC or the other for PC) OR use the web browser to upload the file (requires either java or activeX - not sure) because it opens up the "open file" dialog box - meaning - experimental browsers, like those in my beloved linux box - don't work well with this. ALSO - it states in no unclear terms DO NOT UPGRADE USING A WIRELESS LINK. Use a hard wired computer. I went from 1.23 to 1.22 and back and forth and so on testing this remote desktop issue.
FINAL FIX: load 1.23, hit the button to reset the router to the defaults, load 1.22, reboot, hit the button to reset the router to the defaults, then type all your configuration back in.
Why the crazy steps? If you loaded 1.23, typed ANYTHING in the boxes that aren't available in 1.22 - it remembers and will cause problems, even though that option isn't availble in 1.22 (I tried this - several times for fun). 1.23 -> load setup defaults -> load 1.22 -> load setup defaults -> configure.
Live without their crippled version of RADIUS (if you don't know what this is you don't need it) and who cares about the crappy 4X mode for the B+ stuff? Another marketing ploy anyway.
Bottom line - with some experimentation, I figured out the firmware thing. IT has worked BETTER than the linksys ever did (can we say firmware of the week?) and improved over the netgears I have used (you can print and not be disconnected from the internet - thanks a lot netgear).
4 stars because firmware is supposed to fix stuff, and their two listed updates should not have affected the RDP stuff in 2000/XP. But it did.

Click Here to see more reviews about: D-Link DI-714P+ Wireless Cable/DSL Router, 4-Port Switch, Prnt Server, 802.11b, 22Mbps

D-LINK DI-714P+ - The AirPlus Enhanced 2.4GHz Wireless Router combines next generation 802.11b Digital Signal Processing ( DSP ) technology from Texas Instruments with D-Link's own robust firewall security features, for simple installation and comprehensive management settings.Fully compatible with the IEEE 802.11b standard, and interoperable with all existing 802.11b compliant devicesSupports 64/128/256-bit WEP encryptionBuilt-In Print Server -Includes Parallel port to connect a printer, along with Windows based print server software applicationDimensions -1.3H x 6.5W x 9.25L; weighs about 2 poundsThree year limited warranty

Buy NowGet 50% OFF

Click here for more information about D-Link DI-714P+ Wireless Cable/DSL Router, 4-Port Switch, Prnt Server, 802.11b, 22Mbps

Read More...

Sunday, April 29, 2012

Cisco-Linksys BEFSR81 Cable/dsl Router with 8-PT Switch Review

Cisco-Linksys BEFSR81 Cable/dsl Router with 8-PT Switch
Average Reviews:

(More customer reviews)
Due to the increasing size of my home network, I decided toupgrade to the 8 port BEFSR81 from the 4 port BEFSR41. The two areidentical in size. A Cable/DSL router is a MUST HAVE for those whowish to share a broadband connection. 99 percent of DSL providersutilize what is known as Point-to-Point Protocol over Ethernet(PPoE). This works just like a normal dial up connection where youhave a username and a password. Normally, this PPoE is done viasoftware installed on your computer. This has many limitations. First,the host computer must always be on for others to utilze aconnection. In that sense, each computer is not independent of theother.
The Linksys has PPoE software built into it. Each computerplugged into the unit can access the internet independently of eachother. Better yet, you never have to see a username/password screenwhen connecting to the internet.
In addition to allowing one toshare a connection, the Linksys also acts as a hardward firewallpreventing hackers from accessing your computers. A must have! Youcannot be secure enough these days!
The unit is easy enough to useNovice to expert. While they're are many advanced features, it is notimperative to set or configure them. The html based interface of theunit is extremely intuitive and easy to figure out. The unit itselfleaves a very small footprint.
The linksys supports DMZ which isknown as a demilitarized zone. It basically allows one local user tobe exposed to outsiders. It is used for such tasks asvideoconferencing and internet gaming where constant two waycommunication is essential. In addition Quality of Service (QoS) isonly offered on this 8 port model. It allows you to prioritizeinternet tasks such as http, ftp, telnet, etc.... Not really thatimportant unless you have many users on at once.
Many cable modemproviders utilize a system where they "lock" your cablemodem service to either 1 modem, or 1 network card. This is to preventyou from sharing or using your connection with other suchcomputers. They're is a hardware number encoded onto your network cardand modem. This is known as a "MAC" address. To circumventthis, the Linksys cable/DSL router has a box where you enter in theMAC address of the item that the cable modem service is locked to andit will emulate it. Very clever and works very well!.
One thing theLinksys cannot help you with is running cables throughout your houseto different rooms! Right now I have managed to run ethernet cablesthrough 5 different areas of the house. I have networked our homeLaser printer (HP LaserJet 2100TN)and have added a WirelessLAN setupso now with a laptop I can surf via wireless broadband!

Click Here to see more reviews about: Cisco-Linksys BEFSR81 Cable/dsl Router with 8-PT Switch

A simple and inexpensive way to share your one IP address over yourentire network, the Linksys EtherFast cable/DSL router connects up to 253 PCs toa high-speed broadband Internet connection or to a Fast Ethernet or Ethernetbackbone. Configurable as a DHCP server or client, the EtherFast cable/DSLrouter acts as the only externally recognized Internet gateway on your localarea network (LAN). The router can be configured via SNMP to filter internalusers' access to the Internet and serve as an Internet firewall againstintruders.
The router features advanced functions such as dynamic and static port routing,DMZ hosting, filtering, forwarding, and quality-of-service capabilities. All ofthese functions can be easily configured through any networked computer's Webbrowser.
The Linksys BEFSR81 router comes with a one-year limited warranty.


Buy Now

Click here for more information about Cisco-Linksys BEFSR81 Cable/dsl Router with 8-PT Switch

Read More...

Tuesday, April 24, 2012

D-Link DWL-8200AP Managed Dualband Wireless Access Point, 802.11a/g, PoE, SNMP 2 LAN Review

D-Link DWL-8200AP Managed Dualband Wireless Access Point, 802.11a/g, PoE, SNMP 2 LAN
Average Reviews:

(More customer reviews)
I needed to add an additional access point to my warehouse. I have 2 cisco access points that cost much more. However, this unit works just as well and is easy to set up. Recommend this unit.

Click Here to see more reviews about: D-Link DWL-8200AP Managed Dualband Wireless Access Point, 802.11a/g, PoE, SNMP 2 LAN



Buy NowGet 2% OFF

Click here for more information about D-Link DWL-8200AP Managed Dualband Wireless Access Point, 802.11a/g, PoE, SNMP 2 LAN

Read More...

Saturday, April 7, 2012

D-Link DIR-628 RangeBooster N Dual Band Router Review

D-Link  DIR-628 RangeBooster N Dual Band Router
Average Reviews:

(More customer reviews)
I am in the business of IT and telecom.
I have used some other high end WiFi AP and routers in my days.
This DLink 628, even though just a consumer unit, has blurred the line between professional and consumer use wifi routers.
The setup is a breeze. I was up and running (using Mac), without the set up CD, in less than 3 min.
First on speed, it is fast. Side by side testing with the Dlink DIR655, they are both the same speed with all of the config being the same.
The QoS feature is wonderful, you can prioritize by IP to many tiers. So now when my kids are playing games with voice and video, my html browsing can have priority over them. (Since in routing, the voice and video gets priority in getting transferred.)
All in all, this is a wonderful unit for the price (only $75 now on Amazon).
I would buy this one over the DIR 655 since I really don't see any speed improvement on the 655 but almost twice the price.
I give it 5 stars and highly recommend it as a good buy.

Click Here to see more reviews about: D-Link DIR-628 RangeBooster N Dual Band Router

The D-Link RangeBooster N Dual Band Router (DIR-628) is designed for users looking to create a high-performance wireless network. Connect the RangeBooster N Dual Band Router to a cable or DSL modem and provide high-speed Internet access to multiple computers, game consoles, and media players. Create a secure wireless network to share photos, files, music, printers, and more, from greater distances throughout your entire home or office1. Weve also included a QoS engine that prioritizes time-sensitive online traffic to enable smooth Internet phone calls (VoIP) and responsive gaming.

Buy Now

Click here for more information about D-Link DIR-628 RangeBooster N Dual Band Router

Read More...

Sunday, April 1, 2012

D-Link DIR-685 Xtreme N Storage Router and Photo Frame, 2.5" Drive Bay, 3.2" LCD, Draft 11n Review

D-Link DIR-685 Xtreme N Storage Router and Photo Frame, 2.5 Drive Bay, 3.2 LCD, Draft 11n
Average Reviews:

(More customer reviews)
As a database administrator and programmer, I tend to enjoy tech toys. I have a D-Link DIR-825 Xtreme N Dual Band Gigabit Router sitting on my desk, and was excited to be offered the D-Link DIR-685 Xtreme N Storage Router as a more visually appealing and versatile router.
The D-Link DIR-685 Xtreme N Storage Router offers high speed wired and wireless n connections. Wireless connections can be managed by zones including guest connections. Unlike most routers, the DIR-685 includes network-attached storage (NAS) capabilities and a digital picture frame.
The initial set-up was simple to complete, however testing revealed the network didn't set up correctly. My PC can connect directly to the network, but cannot access any wireless networked devices even though I can ping them. I called customer support, only to be given the run around by people who didn't understand my problem. I asked my other half who is more familiar with networking to speak with customer service. This is when they admitted they didn't understand the problem and escalated to a specialist who would call back later. When the specialist called, the result was basically since I can ping the devices it's not a router problem. So I'm stuck with a network which doesn't work properly and have no clue how to fix.
The router frequently freezes up and drops connections. Freezing is obvious thanks to the digital picture frame as the images just stop rotating. It is not uncommon for me to unplug the router three times a week or more to unfreeze. Meanwhile there is no telling when this unstable router will drop a connection. Since the router sits on my desk, it's easy enough to disconnect and reconnect the network cable, but I'm tired of listening to my other half's constant valid complaints.
The digital frame is a nice touch; however it is way too small. For proper viewing the router would need to be pretty close to the viewer. This may cause a conflict between viewing and placing the router in an appropriate spot for wireless connectivity. Anyplace with too much distance makes the photos too small to distinguish.
I really enjoy using the frame channel with the digital photo frame. Setting up an account at the frame channel website was simple. I was able to sign up for news, weather, sports, stocks, and magazine sites as well as images from my facebook friends.
With the digital picture frame, the router includes an intuitive menu selection for showing stats and settings. The NAS drive (hard drive not included) was also simple to install and put to use.
As a techno-geek I was excited to try out this router. However my network isn't working properly, while D-Link customer service was unwilling to help resolve the problem. The router freezes and drops connections regularly. If I weren't having connectivity and freezing issues, I'd be willing to invest more time determining the networking issue. This problem is huge for a router and overshadows the digital picture frame and NAS system. This router has potential to be a fun versatile device, but I cannot recommend purchasing an expensive product which fails at its primary purpose.
PROS:
Frame channel
Intuitive on-board menu display
NAS (network-attached storage) system
CONS:
Never got it to work properly
Customer service not helpful
Digital frame too small
Regularly freezes and drops connections

Click Here to see more reviews about: D-Link DIR-685 Xtreme N Storage Router and Photo Frame, 2.5" Drive Bay, 3.2" LCD, Draft 11n

At first glance, D-Link's Xtreme N Storage Router might be mistaken for a basic digital photo frame. Take a closer look, and you will find that this 2009 winner of the prestigious Red Dot Product Design Award is more than a photo frame. It's also a high-performance router that lets you create a wireless network in your home, so you can share high-speed Internet access with multiple computers, game consoles, and media players. You can also use the Xtreme as a network-attached storage (NAS) device that stores your files and prints and shares photos, iTunes libraries, and more.
High-Speed Connection and Full Wireless Coverage for Ease of Use With an integrated 802.11n high-speed band and a 2.4GHz signal, the D-Link Xtreme lets you experience full wireless coverage throughout your network. The powerful MIMO antennae are internal, which means that you can enjoy faster speed and longer range without sacrificing the router's stylish appearance.
The Xtreme also includes Ethernet Gigabit ports for file transfer rates up to 10 times faster than the standard 10/100 Ethernet ports. And thanks to the router's touch-sensitive buttons that let you easily add devices to your network, multiple computers, printers, and even game consoles will be available at your fingertips.
Network-Attached Storage for Easy File Access High-speed connectivity is only the beginning. The DIR-685 can also double as a network-attached storage device (NAS). It has the ability to hold a compact 2.5-inch hard drive. Simply pop open the cover and slide in the drive (sold separately), and the router's built-in NAS functionality will do the rest.
With the Xtreme N Storage Router, you can safely store files on your home network and access them wherever you go. Take your laptop with you, connect to the Internet, and then retrieve your files from the Xtreme using the router's built-in FTP server.
BitTorrent Support and Video Streaming for Versatility The Xtreme includes the latest BitTorrent software support, so you can access and store digital media directly from the Internet without the need for your computer to be turned on or connected. For extra large files, you can get the download process started and then walk away with the confidence that your video clips or songs will be on the system's hard drive when you return.
The built-in Universal Plug-and-Play server allows you to easily stream video files through a compatible media player onto your television. You can even stream files from your Xbox 360 and PlayStation3 gaming systems.
Digital Frame Lets You Share Photos, Print Photos, and More The Xtreme also includes FrameChannel software. Once you set up a free account, you can begin sharing your latest photos with family and friends using Flickr, Picasa, Facebook, and other popular photo sharing sites. With two USB 2.0 ports, you can even connect to a printer to print your photos.
Better still, you can use the Xtreme to subscribe to your favorite RSS feeds. Get the latest news, stock updates, sports scores, time, date, weather conditions, and more--all directly from your frame.
What's in the Box Xtreme N Storage Router, CAT5 Ethernet cable, stand, power adapter, and CD-ROM with Installation Wizard and product documentation.

Buy NowGet 60% OFF

Click here for more information about D-Link DIR-685 Xtreme N Storage Router and Photo Frame, 2.5" Drive Bay, 3.2" LCD, Draft 11n

Read More...

NETGEAR KWGR614 Open Source Wireless-G Router Review

NETGEAR KWGR614 Open Source Wireless-G Router
Average Reviews:

(More customer reviews)
I bought this router in 2006 and it's working fine. I have 3 computers and i don't have any problem connecting between them and with the internet connection.

Click Here to see more reviews about: NETGEAR KWGR614 Open Source Wireless-G Router

The NETGEAR KWGR614 Open Source Wireless-G Router is an 802.11g wireless router that includes open-source code for Linux developers and enthusiasts. This enables customization and the ability to create firmware for specialized applications.
Wired and Wireless Connectivity The KWGR614 functions as a 802.11g wireless access point, supporting speeds up to 54 Mbps. It is backwards compatible with 802.11b networks. There are two detachable 2dBi antennas included for greater flexibility.
The device also has a built-in switch with four 10/100 Mbps auto-sensing Ethernet ports. The KWGR614 has up to twice the WAN-to-LAN throughput of other home routers for greater performance.
High-Class Security The KWGR614 supports a Stateful Packet Inspection (SPI) firewall that protects against Denial of Service (DoS) attacks. The wireless portion of the router supports WPA-PSK and WPA2-PSK encryption, as well as 40/64-bit and 128-bit WEP encryption.
Open Source Extensibility Open-source code is provided for Linux developers and enthusiasts which enables customized firmware for specialized applications. An Open Source Developers Guide is included.
The NETGEAR KWGR614 Open Source Wireless-G Router is backed by a 1-year warranty.
What's in the Box KWGR614 Open Source Wireless-G Router, setup CD, power adapter, ethernet cable, warranty/support information card.

Buy Now

Click here for more information about NETGEAR KWGR614 Open Source Wireless-G Router

Read More...

Saturday, March 17, 2012

D-Link DWL-3140AP Web Smart 802.11g PoE Access Point Review

D-Link DWL-3140AP Web Smart 802.11g PoE Access Point
Average Reviews:

(More customer reviews)
These little jewels will be an ultimate test of your patients. They only work with a DES-1228P D-Link switch as mentioned. They have no web interface and use a little (buggy) SNMP application to set them up. This makes remote administration virtually impossible. Several times I had to default the switch and APs to factory settings to get the APs to configure. There is only two settings on the switch that need set to make the APs work. This equipment would not work on my network. I had to put the whole system (switch and APs) on their own network. Once you get them up and running it seems to work pretty good. The SNMP application is the biggest downside. You can setup groups and all sorts of stuff, BUT if you load the SNMP app on another computer it doesn't recognize the groups or settings you setup on the other PC. You'll have to set it up all over again. It uses a local database on your PC to store this info. The settings are stored in the APs so after setup you don't need to use the SNMP app unless you want to make a change. With groups you can push a single change to all APs in that group. Very nice feature if you're doing MAC filtering and don't want to type the MAC address on all APs.
Bottom line is I'd do some more research before buying this system again. I know there are more expensive systems out there like 3COM. A full web interface would make this setup much better. The switch has a web interface and I wish they could incorporate the AP setup in it.


Click Here to see more reviews about: D-Link DWL-3140AP Web Smart 802.11g PoE Access Point



Buy Now

Click here for more information about D-Link DWL-3140AP Web Smart 802.11g PoE Access Point

Read More...

Thursday, March 8, 2012

SonicWALL TZ 170 Wireless 10-Node Firewall (01-SSC-5710) Review

SonicWALL TZ 170 Wireless 10-Node Firewall (01-SSC-5710)
Average Reviews:

(More customer reviews)
Warning: Never, ever, ever buy this item or recommend it to a client. If you do buy it, don't buy it from Amazon, it will be harder to return it.
I am an IT consultant and I want to start off by saying that I really like the Sonicwall products that I have worked with before (wired firewall/routers). This is the reason, in fact, that I recommended this product to a client when they said that they wanted a secure Wi-Fi solution for the Tablet PC's they were buying for their office.
From the first day working with the product I regretted my recommendation.
Setup was easy, even not using the built-in wizards. But after setting things up for a bit I realized that the router was bound and determined to put the wired and wireless computers onto different subnets and that there was no way to change this behavior. That would not have been a problem, except that there is no way to allow those two subnets to communicate with each other (not on a workgroup anyway) unless you use Sonicwall's VPN software to create a VPN from the wireless client to the router and then to the wired network. In fact, the built-in firewall blocks communications between the subnets by default, but even after disabling this (and checking the box that said to "allow Windows networking") the two subnets still couldn't see each other.
I looked on Sonicwall's forum's (which you only have access to after purchasing and registering a product) and found that this is a common problem with no real answers except to use Sonicwalls VPN client (there were other answers given, but none of them worked). The best I could figure the problem was with name resolution, the firewall could be set to "allow" NetBios packets through from one subnet to another, but there was no evidence that the router was actually forwarding those packets. I assume that the subnets could communicate using another name-resolution system, but DNS wasn't available on my client's workgroup :). My clients pretty much needed the Wi-Fi network for Internet access, and didn't use it much anyway, so this didn't bother them and we just left things as they were.
My clients only used the Tablet PC's occasionally for the first couple of months and had connection problems off and on, it was usually a matter of resetting the router, and everything was fixed. Then, in about the third month of owning the router, they began using the Tablet PC's more often and had constant connection problems. I went in to diagnose the problem, thinking that the problem might be the tablets as they were identifying the router as an unsecure connection (it was WPA/TKIP). I made sure that Windows and all drivers were updated. I tried to connect to the router when standing right next to it, but was unable. I discovered that my PDA also identified the connection as unsecured. I made sure that the router had the latest updates and then I checked its logs and discovered that it had been reporting several errors:
1. It would say that it couldn't create an association with the client trying to connect, but then, immediately afterward, would say that the client had been authenticated. (The client wasn't connected)
2. It would say that the clients were using a kind of encryption that it didn't understand (or somesuch).
3. It said, at least once, that too many clients were connected to the router (even though there were only five computers in the office and the thing is licensed for ten), so it couldn't accept any more connections. It said this when reporting elsewhere that there were only three computers connected (one of which was not actually connected at the time).
I unplugged the router and plugged it back in and the tablets connected immediatley. I went to the Sonicwall forums and found that problems like this were quite common (as were stories of consultants with clients angry about this). It seems that the thing "freaks out" on a fairly regular basis and then just drops connections and doesn't let them re-connect.
I had already spent several hours confirming that it was the router that was at fault and so, at this time, I recommended to my client that they get rid of this and buy a D-Link for $50. They did, it worked without a hitch.
I've already done several hours of free work for them trying to get my recommendation to work and now I'm trying to return the router for my client, so they aren't out $450 (or I'm not out $450, since I recommended the thing). I called Sonicwall and was forwarded to sales and then to the "account manager for my territory" who basically told me that there isn't a darn thing that Sonicwall will do for me and kept trying to get me to talk to tech support (even after I told him that my client had purchased a new router that was working just fine), but I already spent so many hours pinning the problem on the router and wasting my client's time, and my clients were already so frustrated with the thing (and, by proxy, me) that I don't want to spend a couple of more hours trying to fix this very badly put-together product (it was noted a few times in the forums that this appears to be just a normal Sonicwall firewall/router with Wi-Fi slapped on as an afterthought) and frustrating my clients any further (and shutting down their network again). He said that there was nothing that Sonicwall could do about it and that I have to return the product to Amazon who, I think he said, will then try to pass it back to their Sonicwall reseller and they will, I think, consult Sonicwall support, so my client may or may not get any money back. I wasn't sure on those last two bits.
One way or another, this guy was wayyyy more concerned about getting me to keep the router than satisfying a consultant who has been responsible for the sale of several of his company's products. A mistake that I won't make again.

Click Here to see more reviews about: SonicWALL TZ 170 Wireless 10-Node Firewall (01-SSC-5710)



Buy Now

Click here for more information about SonicWALL TZ 170 Wireless 10-Node Firewall (01-SSC-5710)

Read More...

Sunday, March 4, 2012

D-Link DIR-601 Wireless N 150 Home Router Review

D-Link DIR-601 Wireless N 150 Home Router
Average Reviews:

(More customer reviews)
Reviews. from people like me don't really help you consumers much, as I am a tech freak, so I come on here, already knowing what I want to buy, all I will say is that, if you are looking for a wireless router that has great strength over a moderate distance, then the D-Link N150 is for you. It works for just browsing, and gaming alike. I have yet to lose a connection with the massive use I have going on with it.
I have 9 computers, 1 Playstation 3, 2 Xbox 360's and 1 Nintendo Wii, running off of this one wireless router, and even with 80 percent of those up at one time, I have never been dropped, and have seen full connectivity each time, with perfect latency in between. No lag, Nor overlay.
I live him an apartment, with 3 people.

Click Here to see more reviews about: D-Link DIR-601 Wireless N 150 Home Router

Dir-601 device, power adapter, ethernet cable, vertical stand, mounting kit & ru.

Buy Now

Click here for more information about D-Link DIR-601 Wireless N 150 Home Router

Read More...