Enable-IT 820 Unpowered Ethernet Extender Kit Review

Average Reviews:

(More customer reviews)I wanted to use an existing high speed internet connection from my office in a remote location about 600 feet away. Wireless was not an option due to cement and steel construction and building configurations. Since we had 30 year old telco wire running to all locations this seemed the best solution. I ordered the 890 model, made the connections, powered it up and it worked perfectly. When I test the speed at both ends it is exactly the same. This is truly as simple as it sounds.

Click Here to see more reviews about: Enable-IT 820 Unpowered Ethernet Extender Kit

Click here for more information about Enable-IT 820 Unpowered Ethernet Extender Kit

Read More...

Motorola SURFboard SBG900 DOCSIS 2.0 Wireless Cable Modem Gateway (Black) Review

Average Reviews:

(More customer reviews)I work in the computer/software industry and am generally critical of the cheap throw-away quality of most electronics. I was nervous about this purchase because I had read two other reviewers mention 1) The Motorola SBG900 allocated two IPs from the broadband provider such as Comcast if you connected more than one computer, and 2) the range was poor. I doubted the first, and I live in a small house for the second.

I have been using a DLINK wireless router for the last 1-1/2 yrs. Reliable but it has a high-pitched hum that is incredibly irritating. I returned the first, only to get another with the same whine, so I figured it was a manufacturing/component flaw. I stuffed it in a corner of the basement to keep from hearing it. This was my experience with my DLINK wireless router, not the Motorola.
So here's what I found re: the Motorola SBG900. Powered it up, Comcast prompted me to download their "installation software" when it detected an unknown cable modem, clicked Yes 5 times, and was on the Internet. Then I configured the wireless portion to match the WEP 128-bit settings from the powered-off DLINK (used the same SSID, Shared Key, etc.), activated the firewall, hid broadcast of the SSID, and both my laptop and desktop connected without a hitch. Even I was surpised. Their wireless NICs are DLINK and Intel, so compatibility wasn't an issue. I never even opened the manual which comes on the CD. I was happy to see a number of WPA (next generation) security options when selecting the encryption mode. However, I didn't bother with that now, but may later, since I'm already on 128-bit WEP. Also the range is the same as my older DLINK, so I'm very content with this purchase. Very happy to reduce the clutter by consolidating devices. Even in the world of MIMO and future technologies, 802.11G (54Mbs) is fine for my needs. I recommend this cable modem.

Click Here to see more reviews about: Motorola SURFboard SBG900 DOCSIS 2.0 Wireless Cable Modem Gateway (Black)

802.11g wireless technologyWireless range of up to 328' indoors and 1312' outdoorsCommercial-grade firewall enhances network securityIncludes power adapter installation CD USB and Ethernet cables

Get 17% OFF

Click here for more information about Motorola SURFboard SBG900 DOCSIS 2.0 Wireless Cable Modem Gateway (Black)

Read More...

Panasonic BL-C131A Network Camera Wireless 802.11 Review

Average Reviews:

(More customer reviews)My wife and I wanted to keep an eye on the nanny with our baby from work. After researching the network cameras for several months, it seemed that only Panasonic cameras consistently received positive (usually glowing reviews) whereas cameras from other major brands like Linksys, D-Link, etc received mediocre or poor reviews. So I went with Panasonic. And after about a month, I have to say I am very impressed with it. Some background: I have a classic Linksys WRT54G 802.11g router, with 2 WinXP PCs connected to it via ethernet and 3 more PCs connected wirelessly; plus, I have AT&T/SBC DSL service via a Speedstream 5100 DSL modem. If you're moderately computer literate, you should have no problem following the included instructions to setup (view and control) the camera in wired mode or in wireless WiFi mode.
But if you want to setup the camera to be viewed (and controlled) from the internet, you need to do a bit more work. And this is where Panasonic's excellent, excellent customer support comes in. Panasonic's support line is 8_0_0-2_7_2-7_0_3_3; they are open Mon-Fri 9AM-9PM and Sat/Sun 10AM-7PM Eastern US Time; this tech support is available to you for the LIFE of the product. They will walk you through how to setup the camera, configure your router (for, among other things, port forwarding), and register with Panasonic's FREE Dynamic DNS web service. This last point is important: Panasonic network cameras include FREE Dynamic DNS hosting service for the life of the product; other brands offer the service for an annual fee.
Okay, step-by-step, here's how to config the camera for internet viewing:
First, if you use DSL as I do (as opposed to cable broadband), you have to configure the DSL modem for "bridge mode." (If you don't use DSL, then you can skip this step.) This is because DSL modems act as a router, and port forwarding cannot work behind both the DSL modem's router and (in my case) the Linksys WRT54G router. If you want, you can call your DSL tech support to ask them to walk you through how to "bridge" your DSL modem. But here's what I did.
1. Login to your DSL modem (for me, it's 192.168.0.1) using your DSL account (for me, it's my SBCglobal email address).
2. Select Advanced >> PPP Location
3. Select Bridged Mode (PPPoE is not used), then Change PPP Location
4. When prompted, restart the DSL modem
5. Login to your router (for me, it's 192.168.1.1)
6. Under Setup> Basic Setup >> Internet Connection Type, select PPPoE and enter the DSL login & password info you normally would enter in your DSL modem to authenticate your DSL service.
7. At this point, the "bridging" should have been successful. To check that bridging has been successful, click Status >> Router, and check that you are "connected" with an IP address showing. If successful, you should also see that your DSL modem's "internet" LED light is off while your router's "internet" light is on. What you basically have done is to move the point of authentication for your DSL service from the DSL modem to your router; your DSL modem merely acts as a bridge for the DSL service to your router.
8. Now, we move on to configuring the camera itself. I assume that the camera has already been configured for wired and wireless mode. Login to the network camera (for me it's, 192.168.1.253).
9. Click Setup. Change the Port No. from the default of 80 to 50000 (fifty thousand) and enter the IP address of the camera (for me, it's 192.168.1.253). Click Save, and the camera will restart. When it finishes restarting (taking as long as 1.5 min), it'll bring you back to the "Top" home page of the camera config screen.
10. Log back into your router, and go to Applications & Gaming, where you'll be able to set up port forwarding.
11. In the Port Range, enter 50000 as "Start" and 50000 as "End." Enter the IP Address of the camera (for me, 192.168.1.253). Check Enable. Save Settings.
12. Now, log back into your camera. Go to Setup >> DynamicDNS. Select viewnetcam-dot-com, then Next.
13. Click on "Your Account Link" to bring up the viewnetcam.com registration page, where you then select New Registration. Enter your desired registration info and select your domain name at viewnetcam-dot-com (e.g. yourname-dot-viewnetcam-dot-com). Click Choose.
14. Now, you will be shown a page confirming your registration. Under DDNS status, you will see Active-waiting. You need to wait up to 10min as the domain registration occurs, at which time, the status will change to Active.
15. We're almost done; stay with me! From WinXP Start Menu, click Run and type "cmd" to bring up a DOS window.
16. In the DOS window, type "ipconfig/all", which shows your computer's various network information. Under Ethernet adapter Local Area Connection, copy down the two addresses under DNS Servers.
17. Log back into your camera, select Setup, and enter the 2 DNS Server addresses from ipconfig/all in the 2 DNS boxes.
18. Go back to viewnetcam-dot-com, login to your account, and check that the DDNS status is now Active. If so, then you're all ready to go!
19. Go to yourname-dot-viewnetcam-dot-com:50000 to see your network camera on the internet!

Click Here to see more reviews about: Panasonic BL-C131A Network Camera Wireless 802.11

Wireless Network Camera 802.11g, MPEG4, Automatic Network Configuration, Universal Plug and Play, Set-up Wizard, Remote Pan/Tilt Control, Built in PIR motion detector

Click here for more information about Panasonic BL-C131A Network Camera Wireless 802.11

Read More...

Motorola SURFboard Gateway SBG6580 DOCSIS 3.0 Wireless Cable Modem Review

Average Reviews:

(More customer reviews)When evaluating this type of equipment, one must differentiate between the device itself and other factors that can impact its performance. Blaming the manufacturer for issues likely caused by one's ISP is akin to saying, "I can't get past third gear because of all this construction on the highway... I'll never buy a Jaguar again!"
That said, the SBG6580 is a solid piece of kit.
This latest addition to the SURFboard line combines a DOCSIS 3 cable modem with a gigabit switch and a dual-antenna 802.11n wireless access point, providing all the networking equipment a home office needs in a single compact package... this amounts to a single point of failure, but that's par for the residential course. It can deliver 42 mbps downstream on a single channel (which my provider brands "Lightning") with support for eight bonded channels... meaning that when the day comes that ISPs start selling triple-digit speeds, this gateway won't need to be replaced.
Wi-Fi performance has been comparable to my old draft n router with similar range and throughput in a mixed mode environment. What sets the SBG6580 apart are its better indicator lights and superior configuration utility which offers some settings normally found only on enterprise-grade equipment. Those less inclined to tinker should know that push-button support is provided; once the cable guy finished with the wall outlet, setup took less than five minutes.
Finally, one word of caution: the SBG6580 needs airflow. I originally placed it flush against a similarly-sized backup hard drive on my desk and found the unit hot to the touch after a few hours. To avoid problems, do not block the vents.


Click Here to see more reviews about: Motorola SURFboard Gateway SBG6580 DOCSIS 3.0 Wireless Cable Modem

The SBG6580 SURFboard Wi-Fi Cable Modem Gateway enables the delivery of innovative ultra-broadband data and multimedia services as well as high-bandwidth home networking. Designed for seamless mobility, Motorola's SBG6580 is a fully integrated all-in-one home networking solution that combines the functionality of a DOCSIS/EuroDOCSIS 3.0 cable modem, four-port 10/100/1000 Ethernet switch with advanced firewall, and an 802.11n Wi-Fi access point in a sleek, stylish package for the sophisticated consumer. It's the perfect networking solution for the home, home office, or small business, allowing users to create a custom network to share a single ultra-broadband connection, files, and networked peripherals using wired or Wi-Fi connectivity. Cost-effective, efficient, and secure, the SBG6580 enables users to maximize the potential of their existing resources, while benefiting from next generation high-bandwidth services.

Get 13% OFF

Click here for more information about Motorola SURFboard Gateway SBG6580 DOCSIS 3.0 Wireless Cable Modem

Read More...

Actiontec MegaPlug A/V 200 Mbps Powerline Network Adapter Kit (White) Review

Average Reviews:

(More customer reviews)Years ago, I purchased one of the first through-power-line Ethernet kits on the market. At the time, the claimed throughput was low (say, 10mbps), and the actual throughput was ridiculously slow. Not to mention the fact that the connection seemed to hang inexplicably with great frequency. In a word: Not ready for primetime, not ready for anything, really...
Fast forward nearly a decade. By now, wireless Ethernet routers are cheap and easy to use and just about everyone has one.
Into this environment, Actiontec has dumped their new MegaPlug "200 Mbps" powerline network kit.
Your first question, and it's a good one, is: "What's the point?" And for many people the answer will be "none, really, in your situation."
BUT there are two sets of people for whom something like this--if it works--is a godsend.
First off, there are those who simply cannot set up something like a wireless router. It's not hard, but there are still a lot of complete tech phobes out there. Think: your Grandparents, or maybe even your parents. Sure, you could go over and set things up for them. But then what happens the first time the router goes down and needs to be rebooted or whatever? Panic calls at midnight are not most people's idea of bonus time.
The second set of people who could use something like this, if it works, are those with wireless dead spots in their homes. There are a lot of people like this, actually. No matter where you set up the wireless transmitter, some places just get no signal, or a very lousy one. Now, you can--if you are technically inclined--set up a wireless repeater to address issue. But it's a bit tricky for most people who don't relish spending their Friday night shopping the halls of Frys, Microcenter or BestBuy. This kit offers a simple alternative to a wireless repeater.
OK, enough on who might want this. On to the more significant question: Does it actually work, and how easy is it, really, to set up.
I'll answer the second question first. It is ridiculously, stupidly, unbelievably easy to set this up. Plug one unit in one wall outlet. Run ethernet cable from unit to your router. Plug second unit into another wall outlet anywhere else in your house. Run either cable from unit to the device you want to talk to router. And you are done. Even if you have trouble figuring out how to open the door of a refrigerator, it can't take you more than 5 minutes to set up.
And how does it work? SHOCKINGLY well. In a three story home with about 20 separate circuits (lines on their own circuit breakers), I was unable to find two outlets that could not communicate with each other at a reasonable speed, and without any disruptions. You aren't going to see 200Mbps in the real world, but I saw between 24Mbps and 34Mbps, depending on where I placed the two outlet plugs. Before you sneer, this compares to a normal transfer rate of about 18Mbps for a GOOD wireless G connection. In other words, the Actiontec kit gave transfer rates that were between 33% and 90% FASTER than wireless G!
I can recommend this unconditionally to those who need an alternative to standard wireless with one caveat (and it's a big one): This kit is quite pricey. It runs over a hundred bucks at the time of this writing, as compared to a good quality wireless G router, which can be purchased for as little as $30. In addition, this kit is good for connecting only one location to another single location, whereas wireless is...everywhere.
But if you can get past the price, this kit is terrific.

Click Here to see more reviews about: Actiontec MegaPlug A/V 200 Mbps Powerline Network Adapter Kit (White)

Actiontec MegaPlug HPE200AVP Kit Powerline Network Adapter HLE20003-01KP 754

Get 33% OFF

Click here for more information about Actiontec MegaPlug A/V 200 Mbps Powerline Network Adapter Kit (White)

Read More...

Linksys WUSB11 Wireless-B USB Network Adapter v4 Review

Average Reviews:

(More customer reviews)Make sure you are purchasing the 2.6 or 2.8 version, 3.0 and 4.0 will not work with TIVO units. Amazon does not clearly list the different versions.

Click Here to see more reviews about: Linksys WUSB11 Wireless-B USB Network Adapter v4

1.The Wireless-G USB Adapter with Wi-Fi Finder is a handy, pocket-sized device that combines an easy-to-use wireless network scanner with a USB-connected Wireless-G network adapter. Now you can scan for available wireless connectivity before turning on your computer.Discovered networks are listed in order of signal strength.With the Wi-Fi Finder built into the unit, you no longer need to power on your PC to determine if theres a wireless network connection available. 2.Features - High-speed Wireless-G networking for your desktop or notebook computer .Built-in Wi-Fi Finder detects Wireless-G and Wireless-B signals .Easy to read display shows network name, channel, signal strength, and security on/off .Wireless communications are protected by up to 128-bit WEP or WPA encryption .

Get 22% OFF

Click here for more information about Linksys WUSB11 Wireless-B USB Network Adapter v4

Read More...

Cisco RVS4000 4-port Gigabit Security Router - VPN Review

Average Reviews:

(More customer reviews)I purchased the RVS4000 primarily due to its gigabit WAN port; very few wired firewalls have a gigabit WAN port. Not having a gigabit WAN port is a reasonable design because WAN ports in many SOHO firewall applications will likely connect to T1 (1.5 Mbps) or T3 lines (45 Mbps) at most. Since these data rates are lower than that of an ordinary 100 Mbps ethernet port, a gigabit WAN port is more than what is required of a WAN interface.
However, I wanted to use a firewall/router on the network inside of my primary NAT/SPI firewall which is primarily a gigabit network. So, a gigabit WAN port was an important feature because it needs to connect to a gigabit switch (not a WAN link).
Before my purchase, I read many customer reviews that complained about slow data rates through the WAN port. These reviews were very discouraging since the Linksys had a gigabit WAN interface. This was until I found a benchmark test that explained the negative reviews. The RVS4000 (primarily due to its industrial-grade security features) has a WAN to LAN data rate of 15.9 Mbps; very slow for a gigabit interface. However, this can be improved upon by configuring (turning off) the security features of the firewall. Unless you configure the firewall as a non-gateway device, don't expect orders of magnitude improvement in speed.
Here's the good news. The benchmark clocked the RVS4000 LAN to WAN data rate at 530 Mbps. Since many disk drive interfaces do not have a sustained data rate this high; you will not see this number when transfering files. I have a couple NAS RAID boxes with gigabit interfaces that top out at around 100-150 Mbps (individually). I can get higher network utilization numbers when doing several files transfers between different network endpoints simultaneously. Network file transfers tend to be very CPU intensive, even when using SCSI hard drives. The CPU intensive part comes from having to package up the data into IP packets and managing the data transfer.
The bottom line is that I am very satisfied with this firewall and its gigabit WAN port. But understand that it needs to be configured properly to optimize its performance and functionality. You don't need to be an engineer or rocket scientist to do this; however, you will need a bit of understanding about IP networking. If you use the RVS4000 as a primary firewall (configuring all of its security features), I suspect it will do that job rather well also.


Click Here to see more reviews about: Cisco RVS4000 4-port Gigabit Security Router - VPN

As broadband speeds increase most 10/100 gateways do not have the power to support those higher data rates, and thus become the bottleneck in the network. The RVS4000 10/100/1000 4-Port VPN Router works at Gigabit speeds to meet the demands of todays networks. It features Linksys proven SPI Firewall with an integrated Intrusion Detection and Prevent System (IDS/IPS). Its built-in 4-port full-duplex 10/100/1000 Ethernet switch can connect up four PCs directly, or additional hubs and switches. The QoS features provide consistent voice and video quality throughout your business. In addition the RVS4000 features a Virtual Private Network (VPN) security engine that creates encrypted IPSec tunnels through the Internet. The IPSec VPN tunnels enable remote users from at home, or on the road to easily, and securely connect to the office network through a typical wired or wireless broadband connection. When used with another RVS4000 or other Linksys VPN router, branch-to-branch connections can be established allowing users in a remote office to connect to the corporate network.

Click here for more information about Cisco RVS4000 4-port Gigabit Security Router - VPN

Read More...

TRENDnet 200 Mbps Powerline AV Wireless N Access Point TPL-310AP (White) Review

Average Reviews:

(More customer reviews)If you want to use the advanced features of the AP, the documentation is very light. The average user would be lost. My AP is installed about 85 feet from the Powerline Ethernet connect to the router and the maximum speed is only of the wireless is only 60mb and has a red light indicating good connection. I only get a green light, best connection, when the AP is less than 25 feet. I suspect the problem is that the circuit the AP is on is located on the opposite side of the buss in the power pannel then the Powerline Ethernet is connected to.

Click Here to see more reviews about: TRENDnet 200 Mbps Powerline AV Wireless N Access Point TPL-310AP (White)

Get 30% OFF

Click here for more information about TRENDnet 200 Mbps Powerline AV Wireless N Access Point TPL-310AP (White)

Read More...

ZyXEL NBG-318S 200 Mbps Powerline HomePlug AV 802.11g Wireless Router Review

Average Reviews:

(More customer reviews)UPDATE 1/2011
Both replacement units have failed in their HomePlugAV modules, so I have no HomePlug connectivity. In fact, scanning for Homeplug devices from the managment UI causes both units to crash. Downgrade to one star.
-------------------------------------------------------------------------------------------------
UPDATE 7/2010
My 2nd unit has failed as well; it began spontaneously rebooting and wouldn't stay working for more than a few minutes at a time. However, I got pretty good service from ZyXel: they replaced BOTH units under warranty. Still working 11/2010.
-------------------------------------------------------------------------------------------------
UPDATE 5/2010 :
I reduced the rating to 2 stars after one of my two units quit working after about a year. The Powerline connectivity evaporated after about 9 months and the wifi connectivity started to get intermittent after a year or so. Now the unit will only boot sporadically.
-------------------------------------------------------------------------------------------------
I bought this unit to set up a Homeplug network connection to a home entertainment system that's poorly located for Wifi access, and after some fiddling I'm getting very good performance out of it, nearly 40Mb/sec in real-world circumstances.
When I ordered this router for thirty-nine bucks, it was much cheaper and more capable than the ZyXEL PLA-401 200 Mbps Powerline HomePlug AV Wall-plug Adapter that it's intended to be used with- so I bought two NBG-318S's instead, and configured the 2nd one as an access point. That gave me the benefit of having a 4-port switch as well as a Wifi extender in the access point - why buy the PLA-401? (It's still listed a comparable price.)
Wireless strength was comparable with the D-Link WBR-3210 that it replaced. The router's in the basement and I still have decent signal quality two floors up in our wood-framed house. Plus having the 2nd router configured as a Wifi access point using Zyxel's "roaming" mode (Wifi clients are seamlessly handed off between the two radios as they migrate around the house) has effectively extended our Wifi coverage.
Be forewarned: it takes some arcane BPL voodoo to achieve maximum Homeplug network bandwidth across your A/C circuits, even if it is brand-new shiny code-compliant wiring like at our house. I spent an afternoon juggling the topology of outlets and power strips amongst my appliances while running iperf() between my client and server to monitor the network throughput. I don't think there's any way around the trial and error approach if you want to get good performance out of these things. By some simple, free (but time-consuming) rearrangements of the router, access point and appliance connections the bandwidth at my desired location went from 1Mb/S to 40Mb/S. Here are some tips:
* Homeplug AV performance can be good, but don't believe the 200Mb numbers the vendors throw around; I couldn't even get that bandwidth when the router and access point were plugged into the same outlet next to each other and connected to gigabit Ethernet clients.
* New adopters should be aware that the router and its access points can be on different circuits but pretty much need to be on the same 110V leg of your 220V house service to work. You'll have to check your circuit breaker panel to figure this out for sure.
* The Homeplug network's signal quality (and hence the achievable bandwidth) is extremely sensitive to noisy appliances plugged into the same circuit. For instance, at one point my bandwidth went from 25Mb to 8Mb when I plugged Apple's spiky Powerbook A/C adapter into the same outlet as the access point, and I still take a 5Mb/S hit if someone turns on the dimmable incandescents in our office. I may try putting ferrite chokes on the supply lines of some flourescent fixtures that are still on the common circuits.
* Having the access point plugged into an outlet wired closer to the breaker panel didn't necessarily help. I'm getting the best performance with the access point plugged into a different outlet than the home entertainment appliances, but further in wiring distance from the router - go figure.
* I thought that using surge-protected RF/EMI-filtered power strips on my appliances would help keep noise off the power lines carrying the network signal, but if the noise-filtering power strips were plugged in too close to the access point they actually seemed to filter out the network signal and my bandwidth dropped. Also, some power strip's LED indicators actually put more noisy spikes BACK INTO the line and made the throughput worse; after I quieted them down by clipping out the LEDs, the noise filtering seemed to have some positive effect.
* The Homeplug modems appear to use adaptive signal processing to operate in noisy home environments - the bandwidth can take a big hit when noisy appliances are initially introduced onto the circuit, but then you will see it slowly improve over 30 sec to a minute. (In my experience it was best to reboot the access point in the presence of the noisiest possible signals.) So let your bandwidth measurements settle down before making an evaluation of the benefits of a change to your topology.
* Find a software utility that will allow you to accurately measure data throughput on your network while you are making changes. You'll be chasing your tail if you try to use subjective evaluations of, for instance, how long it seems to take to load a web page. (You'll typically be looking for better LAN performance than your WAN's internet bandwidth anyway.) I used the the iperf utility (Google for it) available for MacOS, Windows and Unix-type systems.
I got good - if not super-prompt - feedback from a customer service technician in response to my prepurchase questions when sent through ZyXel's web site, but haven't heard back from my latest query by regular email. I'm also giving only 4 out of 5 stars because the latest manual available from ZyXel STILL doesn't mention features that are clearly available in the router's standard web-based configuration interface (their Windoze-based configuration "wizard" never functioned properly for me under Parallels) and it took me an hour to figure out how to enable simple WEP wireless security (hint: make sure WPS is turned OFF.)

Click Here to see more reviews about: ZyXEL NBG-318S 200 Mbps Powerline HomePlug AV 802.11g Wireless Router

Get 58% OFF

Click here for more information about ZyXEL NBG-318S 200 Mbps Powerline HomePlug AV 802.11g Wireless Router

Read More...

Cisco SR224T 24 port 10/100 Switch with 2 Combo mini GBIC ports Review

Average Reviews:

(More customer reviews)Reliable, Simple, and most important CHEAP
we have it runing on a data network for a retail store, and it works great
using all ports as well as the GBIC uplink, no issues, been working for a few months.

Click Here to see more reviews about: Cisco SR224T 24 port 10/100 Switch with 2 Combo mini GBIC ports

Cisco SF 102-24 Ethernet Switch - 26 Port - 2 Slot SR224GT-NA Switches & Bridges

Get 14% OFF

Click here for more information about Cisco SR224T 24 port 10/100 Switch with 2 Combo mini GBIC ports

Read More...

D-Link DHP-W306AV PowerLine AV Wireless N Extender, HomePlug AV, 11n Review

Average Reviews:

(More customer reviews)Didn't work, sent it back (thanks, Amazon).
I plugged it into an electrical outlet in the room next door, no connection (green "house" light not on). Tried in my office next to the router, still nothing, a flickering green house indicator. This is with the new DHP 1320 router, which works fine. I was on the support line for an hour, no luck (OK support). I plugged it directly into the router and could get to the IP address but no connection still. I gave up and returned it rather than spend my weekend fighting with a network.I'm waiting for more reviews to see if I was doing anything wrong. My guess would be that the DHP 1320 router is not broadcasting through the powerlines properly.


Click Here to see more reviews about: D-Link DHP-W306AV PowerLine AV Wireless N Extender, HomePlug AV, 11n

The D-Link DHP-W306AV Powerline AV Wireless N Extender enables you to extend your wireless network to the farthest corners of your home without the need for unsightly network cables. It uses your home's existing electrical wiring to create a network or extend your existing network. One DHP-306AV adapter needs to be plugged into your router first and then additional DHP-306AV or DHP-W306AV adapters will utilize PowerLine to connect to and expand your network.

Get 23% OFF

Click here for more information about D-Link DHP-W306AV PowerLine AV Wireless N Extender, HomePlug AV, 11n

Read More...

Cisco SGE2000 24-port Gigabit Switch Review

Average Reviews:

(More customer reviews)I bought this product to setup vlans in our office. The wording using Cisco in the text caught my eye and made me more confident making the choice. When I got it, there were problems in the interface that I had called tech support (Linksys not Cisco) about and they confirmed those bugs and said someone will contact me about fixing them. I then had some problems setting up static routing for layer 3 vlans. I called and got the same lady in tech support (in Asia). She said that she really didn't know much about vlans and tried to leave it at that. Vlan support is the only reason someone would spend $1,000 for a switch. Otherwise, you can buy an unmanaged switch for $100. She said that she will have someone at cisco give me a call. I waited for a week and never got a call back on either instance. She told me that I would have to wait patiently. I waited another week. This was nonsense. Finally, a week later I got an email from a guy at Cisco saying that he would call me in another week. Well the window of opportunity was closing fast on being able to return the product and I did not have a week. I emailed him back and waited 3 days for a reponse which I never got so I returned the switch. He finally called 2 weeks later...thanks alot...too little and too late. I ended up buying a hp procurve with complete instructions and it seems to setup fine so far....almost finished.

Click Here to see more reviews about: Cisco SGE2000 24-port Gigabit Switch

Click here for more information about Cisco SGE2000 24-port Gigabit Switch

Read More...

Linksys PLTK300 PowerLine Network Kit Review

Average Reviews:

(More customer reviews)My wi-fi experiences a problem in a certain part of the house. I had tried different routers including 'N' and the signal would randomly and frequently drop in this one area. I installed the PowerLine in under 30 minutes. The two computers connected have not experienced any outages ever since. Don't forget NOT to plug either unit into a power strip or APS. It will only work if the plugs are directly into the wall socket.

Click Here to see more reviews about: Linksys PLTK300 PowerLine Network Kit

The Linksys Powerline Network Kit contains a single-port Powerline Adapter, and a four-port Powerline Adapter, which let you easily create a network using the existing electrical outlets in your home. Now you don't have to drill holes in walls and climb through the attic or cellar to install network cables -- just use the wires that already run through the building.With Powerline Network Adapters, you can connect computers or any other wired Ethernet device using the HomePlug 1.0 with Turbo network standard. They also work with older HomePlug 1.0 devices. Adding devices to the network is as simple as plugging a Powerline Adapter into an electrical outlet, and connecting your Ethernet-equipped devices to the built-in Ethernet ports. Additional devices can be connected to the same network using additional Powerline Adapters plugged into any electrical outlet anywhere in the house.

Get 20% OFF

Click here for more information about Linksys PLTK300 PowerLine Network Kit

Read More...

Innoband HomePlug AV Wireless N Starter Kit Review

Average Reviews:

(More customer reviews)The Good: Bridges Ethernet devices and extends Wi-Fi coverage using *existing power lines*. Performance is exceptional.
The Bad: Setup is less than straightforward. Documentation is limited.
The Ugly: The 210P-I1 access point's antenna is poorly designed and fragile.
I purchased this product because Wi-Fi reception in my kitchen (which has a lot of stainless steel cabinets and is far away from our Linksys WRT54G Wireless-G Router) is poor.
Before setting up the Innoband HomePlug Kit, laptop reception in the kitchen was bad but tolerable. However, a Logitech Squeezebox Duet Wi-Fi Internet Radio we purchased recently was unusable. We had to walk out of the kitchen to use the Squeezebox Controller, and the Receiver in the kitchen simply couldn't keep up with the streaming audio. Synching with our older Squeezebox was impossible because both players would cut out for seconds at a time.
When I purchased the HomePlug Kit, I was worried that ethernet over power lines simply wouldn't work or would perform so poorly that it wouldn't be useful. I was also concerned that the 210P-I1 access point would be annoying to configure or incompatible with my 802.11g devices. Finally, I was taking a chance by buying an unreviewed product from a company that I didn't recognize.
But the HomePlug Kit does just what it is advertised to do. Namely, it bridges Ethernet devices and extends wireless coverage over existing power lines. And it does so with exceptional performance--better, it feels like, than my existing wireless network. In fact, after the 210P-I1 access point had been running for a few minutes, all 5 of the devices that had been using my router's Wi-Fi selected the 210P-I1--automatically.
My one major complaint about the HomePlug Kit is the 210P-I1 access point's fragile antenna, which I managed to snap within moments of removing the device from its packaging. The break is only cosmetic (the wiring is intact even though its housing was comepletely separated from the unit) so I decided to use some super glue rather than go through the hassle of a return. But I hope Innoband will address this design flaw in future revisions of the product.
My second, lesser complaint is that although Innoband effectively promises a plug-and-play configuration, the experience is in truth less straightforward. The main issue I found is that the 210P-I1 access point was not configured to work with my home network (it was using a different subnet and wireless network). Which isn't really that surprising, but I had to exercise some trial-and-error in order to get everything configured as desired.
In order to integrate the 210P-I1 with my home network, I had to:
1. Connect my laptop via the supplied Ethernet cable to the 210P-I1.
2. Configure my laptop for the same subnet as the 210P-I1:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.210
3. Connect a web browser to http://192.168.1.210.
4. Reconfigure the 210P-I1 with an IP address on my home network.
A. Click "Lan Setting" [sic]
B. Enter an IP address from my home network (e.g., 192.168.0.NNN for addresses ranging from 192.168.0.0 to 192.168.0.255)*
C. Click "Apply"
* Your specific configuration may vary.
5. Reconfigure my laptop for my home network's subnet. Generally this just means using DHCP, but you can use a static configuration like:
IP Address: 192.168.0.NNN
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.XXX
6. Connect a web browser to http://192.168.0.NNN (i.e., the IP address configured in step #4).
7. Reconfigure the 210P-I1's SSID to match my router's existing SSID.
A. Click "Wireless Settings"
B. Change "Network Name(SSID)" [sic] from "innoband" to "mywifi".
C. Click "Apply"
8. Ensure that my router's wireless channel and the 210P-I1's do *not* overlap.
A. Channels 1, 6, and 11 do not overlap
B. The 210P-I1 access point is already configured to use channel 6
C. I reconfigured my router to use channel 11
9. Ensure that my router uses the same encryption and secret as the 210P-I1.
A. Click "Wireless Settings"
B. Click "Security"
C. Choose the "Security Mode" (WEP or WAP) that matches my router's
D. Enter the WEP key or WAP pass phrase that matches my router's
E. Click "Apply"
Admittedly that's a lot of configuration (and the documentation doesn't cover it adequately), but in the end the Innoband HomePlug Kit does exactly what I need it to do. Which is more than I can say for a lot of products I come across.
I plan on ordering another 200P-I1 (the wired device) to bridge more A/V devices like the Samsung BD-P1600 1080p Blu-ray Disc Player.
p.s., Innoband included a black knit watch cap with the HomePlug Kit they sent me. This was a nice gesture (and not a bad cap either).

Click Here to see more reviews about: Innoband HomePlug AV Wireless N Starter Kit

Click here for more information about Innoband HomePlug AV Wireless N Starter Kit

Read More...

Siemens HOMEPLUG/POWERLINE MINI ( 936-2521-001 ) Review

Average Reviews:

(More customer reviews)I purchased the Siemens 2521, 2501 and 2502 Powerline adapters and connected them to the outlets in my home, (which is less than five years old). The setup was easy but the included instruction guide stated little more than "plug it in".
The problems began when I installed the included configuration software on my three computers equipped with WINDOWS ME and discovered that the utility program either froze Windows or took close to 2 minutes to start. The SpeedStream Support staff is aware of the problem and told me that "the programmers at Efficient Networks are working on it".
But the biggest issue I have is that none of the three Powerline products will stay connected for more than 10 minutes! I have tried changing outlets and even tried hooking up the adapters at my friend's house but these things simply refuse to maintain a connection.
Bottom line: Unless you enjoy loosing your network connection and having to get up and reset adapters every ten minutes, stay away from Siemens Powerline products...at least for now.

Click Here to see more reviews about: Siemens HOMEPLUG/POWERLINE MINI ( 936-2521-001 )

Click here for more information about Siemens HOMEPLUG/POWERLINE MINI ( 936-2521-001 )

Read More...