Showing posts with label network adapters. Show all posts
Showing posts with label network adapters. Show all posts

Monday, July 9, 2012

WiFi Booster r9db SMA OMNI-Directional High-Gain Screw-On Swivel Antenna for Linksys - WET54G, WET54GS, WMP54G, WET11, WRV54G, WMP11 PCI Card, WPS11, WRT54GC also for Netgear - FM114P, FVM318, FWG114P, MA311, ME101, ME103, WG302, WG311 and WG311T Review

WiFi Booster r9db SMA OMNI-Directional High-Gain Screw-On Swivel Antenna for Linksys - WET54G, WET54GS, WMP54G, WET11, WRV54G, WMP11 PCI Card, WPS11, WRT54GC also for Netgear - FM114P, FVM318, FWG114P, MA311, ME101, ME103, WG302, WG311 and WG311T
Average Reviews:

(More customer reviews)
I replaced the omni-directional antenna that came with my ActionTec (FiOS) router with this one. Using the unscientific measure of "number of bars" as measured by my iPhone, every reading in my house either stayed the same or improved by one. Since there are only three bars total that is, in my mind, a big improvement.
As an aside, I thought I could further improve things by moving the antenna from the back of the router which is on the floor behind a TV to the top of the TV. I did that with a Hawking RP-SMA TO RJ-SMA ( HAC7SS ) cable and some duct tape (to hold the base of the antenna to the upper back of the TV). In that case things went back to the level of the original antenna. Apparently whatever benefit there was from moving the antenna to what I thought was a better location was more than offset from loss introduced by the additional wire and connector.
Bottom line: if you use this to replace your original antenna then the signal will likely improve. If you make other changed the results could go either way.
BTW, I feel that honest, effective reviews can take the place of first-hand experiences that are lacking in online shopping. I've always appreciated the help I've received from other reviewers and work hard to return the favor as best as I can. I hope you found this review helpful and if there was anything you thought was lacking or unclear leave a comment and I'll do what I can to fix it.


Click Here to see more reviews about: WiFi Booster r9db SMA OMNI-Directional High-Gain Screw-On Swivel Antenna for Linksys - WET54G, WET54GS, WMP54G, WET11, WRV54G, WMP11 PCI Card, WPS11, WRT54GC also for Netgear - FM114P, FVM318, FWG114P, MA311, ME101, ME103, WG302, WG311 and WG311T



Buy Now

Click here for more information about WiFi Booster r9db SMA OMNI-Directional High-Gain Screw-On Swivel Antenna for Linksys - WET54G, WET54GS, WMP54G, WET11, WRV54G, WMP11 PCI Card, WPS11, WRT54GC also for Netgear - FM114P, FVM318, FWG114P, MA311, ME101, ME103, WG302, WG311 and WG311T

Read More...

Sunday, April 29, 2012

Alfa 9dBi WiFi Booster SMA OMNI-Directional High-Gain Screw-On Swivel Antenna with Magnetic Base for D-Link - DWL-2000AP, DWL-2210AP, DWL-6000AP, DWL-6000AP, DWL-500, DWL-G510, DWL-520, DWL-G510, DWL-A520, DWL-AB520, DWL-AG520, DWL-G810, DWL-G510, DWL-800AP, DWL-810, DWL-900AP, DWL-700AP, DWL-800AP and DWL-G810 Review

Alfa 9dBi WiFi Booster SMA OMNI-Directional High-Gain Screw-On Swivel Antenna with Magnetic Base for D-Link - DWL-2000AP, DWL-2210AP, DWL-6000AP, DWL-6000AP, DWL-500, DWL-G510, DWL-520, DWL-G510, DWL-A520, DWL-AB520, DWL-AG520, DWL-G810, DWL-G510, DWL-800AP, DWL-810, DWL-900AP, DWL-700AP, DWL-800AP
Average Reviews:

(More customer reviews)
I purchased this item believing that it would increase connectivity speed and help with current network issues. Unfortunately, it was actually the same or worst at times then the factory antenna that I am currently using. I would not recommend this product to anyone. It might be better to spend the extra money on one that is more expensive and might work. I should have gone to Wal-mart or Staples because at least I could have returned the item without losing all my money. I had to open the package to use the item and I would be subject to a 30% restocking fee and shipping fees. If I returned the item I would be out the total cost of the item and they would have it back. Even if they had to sell it at a lower price they would still make their money back or more. Plus I don't want anyone else to receive this antenna if it does not work properly.

Click Here to see more reviews about: Alfa 9dBi WiFi Booster SMA OMNI-Directional High-Gain Screw-On Swivel Antenna with Magnetic Base for D-Link - DWL-2000AP, DWL-2210AP, DWL-6000AP, DWL-6000AP, DWL-500, DWL-G510, DWL-520, DWL-G510, DWL-A520, DWL-AB520, DWL-AG520, DWL-G810, DWL-G510, DWL-800AP, DWL-810, DWL-900AP, DWL-700AP, DWL-800AP



Buy Now

Click here for more information about Alfa 9dBi WiFi Booster SMA OMNI-Directional High-Gain Screw-On Swivel Antenna with Magnetic Base for D-Link - DWL-2000AP, DWL-2210AP, DWL-6000AP, DWL-6000AP, DWL-500, DWL-G510, DWL-520, DWL-G510, DWL-A520, DWL-AB520, DWL-AG520, DWL-G810, DWL-G510, DWL-800AP, DWL-810, DWL-900AP, DWL-700AP, DWL-800AP

Read More...

Friday, March 30, 2012

TRENDnet Wireless N Gaming Adapter TEW-647GA (Black) Review

TRENDnet Wireless N Gaming Adapter TEW-647GA (Black)
Average Reviews:

(More customer reviews)
First off, I had been keeping my eye out for a cheap alternative to the 360's wireless adapter for sometime now, and when I saw this unit as apart of Amazon's lightning deals for $30, I couldn't pass that up.
Before buying this unit, I was sure to peruse for reviews to see other peoples' luck with the item and was left a bit confused on how the product would work. After playing around with the various settings and getting it to work, I want to just clear the confusion on how this will perform. Also, I have a Bachelors in Computer Networking, not that that means anything, but I have had a good bit of experience playing around with different routers/switches and while reading through the reviews I was left baffled by the varying contradicting opinions of the product.***On a side-note, these types of At Home networking devices are aimed at ease-of-use and my experience had very little effect on how much more/less difficulty I had getting the product to work other than enabling me to filter out the weaker/inane reviews of the product.
Let me clear up the marketing confusion first. This item is a Wireless adapter. IT WILL ALLOW YOU TO CONNECT VARIOUS ITEMS WITH AN ETHERNET JACK TO YOUR WIRELESS NETWORK. That means if you have a desktop with an ethernet jack in the back that you would like to be able to hook up to your WIFI without stringing it to your router, this will work. For the "gamer's" that for some reason this item is targeting(most likely the xbox 360 owners), this item works flawlessly and comes strongly suggested given a few caveats(i.e a bit more cumbersome than Microsoft's options Xbox 360 Wireless Network Adapter A/B/G Networks Only,Xbox 360 Wireless Network Adapter A/B/G & N Networks given that it has to be plugged into an electrical outlet).
I'll try to give you guys a step-by-step run through of how the configuration process worked for me.
First, I plugged it into an outlet and connected an ethernet cable from my PC to the unit(for the non-techies out there, this should work the same regardless of the Operating System you're on).
Second, I popped in the CD that came included and loaded the router setup software off of the CD. This step was a breeze given that there was no installation of anything onto your computer, as other reviewers had falsely alluded to.
Once in the router setup software, I did run into a few odd hiccups that slowed the overall process. The software was able to find the device right away and I was off and running setting up the unit, although almost every time I hit OK or Next through the prompts, I was returned with something like "Error, the changes were not made" though they were... Other than that, the setup was pretty quick and painless and should be no problem to those that dread anything techie like many of those in my family, given that they read the manual and follow the instructions. And once you have it setup to your wireless network, it'll pretty much connect any of your devices that has Ethernet port to your wireless without having to run through the setup process again. All the settings are saved so you can just move the unit anywhere. As long as you don't tweak anything in your router, this unit should be able to be unplugged and moved around as much as you like and still connect you every time.
**My issues with the strange contradictory error messages were solved once I upgraded to the latest firmware
As for performance, this unit has worked flawlessly for my needs. I was playing Left 4 Dead 2 and a few other games through it on my 360 and had no significant lag or difference between playing through this unit over playing it hooked up to my router with an ethernet cord. I also tried streaming a few movies from my PC, and again, it worked flawlessly while I fast forwarded/backward and skipped chapters. Though I have yet to try streaming anything HD from services like Netflix, I don't imagine anyone would have any problems given the much more than sufficient bandwidth that this unit provides as long as you have a capable internet connection from your Internet Service Provider. I also unplugged my computer from the router and plugged it into this unit just for kicks and, unsurprisingly, it works just as it should.
The device itself is surprisingly small and sleek, though it is a bit of a finger-print magnet. Something of note too, is at the top of the router lies a Wifi Protected Setup button(WPS) that I'm guessing would make the process even easier by eliminating the need for the PC setup process if your router has support for it, mine did not, so I can't comment on that.
Overall, I would strongly recommend this product to anyone looking for a cheap way to connect their devices up to their wireless network. Even if I hadn't gotten it on Amazon's sale, knowing what I know now about it, I would gladly buy this unit again. That's my 2 cents anyways and I hope it helped.
**Update
So after about 4 months of owning this product I am still very satisfied with my purchase. I did run into a pretty frustrating problem after my house lost power. My router was reset and the Trendnet adapter did not seem to want to stay connected. After a bit of poking around, I managed to fix the issue by going through Trendnet's provided setup software again and giving the device a Static IP. It's been working flawlessly since. (*Of note though, this doesn't seem to be an isolated issue, I have seen a few other reviewers state having inconsistent connection issues as well. If you get that issue, just try what I did and the device will be working the way it should in no time.)

Click Here to see more reviews about: TRENDnet Wireless N Gaming Adapter TEW-647GA (Black)

The Wireless N Gaming Adapter (TEW-647GA) connects your favorite Ethernet-ready gaming console to a lag-free wireless n network. No need to locate your gaming station near an Internet connection cut your cables and start winning with highperformance wireless n. Setup is quick and simple, with no drivers to install. Works with Nintendo Wii , Xbox , Xbox 360and PlayStation 2 and 3. Connect multiple gaming consoles wirelessly and play head-to-head or challenge others over the Internet in multiplayer mode. The latest in wireless encryption ensures wireless security. Advanced Multiple Input Multiple Output (MIMO) antenna technology reduces wireless dead spots. Wireless Protected Setup (WPS) lets you integrate other WPS devices into your secured network quickly.

Buy NowGet 42% OFF

Click here for more information about TRENDnet Wireless N Gaming Adapter TEW-647GA (Black)

Read More...

Wednesday, February 1, 2012

Cisco-Linksys WGA11B Wireless-B Game Adapter Review

Cisco-Linksys WGA11B Wireless-B Game Adapter
Average Reviews:

(More customer reviews)
Okay, first of all I'm hot on linksys (see my other reviews). I used to do network stuff for a living - don't anymore, but I have always been impressed with Linksys (compared to Netgear, DLink and Microsoft) for the consumer market. Their stuff is by and large (prosumer) - it has some good pro features without having to be a rocket scientist to configure the thing. Now that Cisco owns them - it's even a better deal as Cisco has been putting some nice features into all of linksys's products. While the tech support guys at linksys all need an attitude adjustment (they are a surley bunch) - the products often don't require tech support... so I suppose it is a good-news, bad-news, kind of thing...
But this sucker was PLUG AND PLAY for all intensive purposes. There are a few things, however, I think people should know in order to set this up:
a) You probably want to turn off all WEP and MAC filters. You can turn them back on once you get the sucker id'ed on the network and talking... but for now, leave it off.
b) You probably want to turn ON your SSID (again, makes it easier for the thing to install out of the box.)
c) You probably want to know what your broadcast frequency is on your WAP. If you are using a linksys WAP it is found on the admin screen regarding security. You need to look for the broadcast ID channel (default is six). That is the channel you want to tune the WGA11B. However, what I really recommend that people do is avoid "ad hoc" mode entirely and set the WGA to In mode (looks kind of like 1n on the WGA display) - this is infrastructure mode. Infrastructure mode is what you want to use if you are using a broadcasting router/switch/bridge access point (like the linksys Wireless-B, G, WAP11, etc.)
d) Make sure you know what type of cable you are using to connect it. The cable that comes with the broadcast bridge unit (the WGA) is actually a CROSSOVER cable. This was a bit surprising to me (not that they are hard to make, just, you rarely ever get one from someone - you always wind up making them). You'll know you have the switch in the right position when the WAN light (the little symbol that looks like a circle with two lines in it) lights up GREEN.
e) If you are not already, I'd set up DHCP for the moment. The bridge is default configured to try and connect via DHCP. If you don't have DHCP configured, I don't know what it is going to try to do default IP static (probably 192.176.1.1 if it is like other linksys products). Save yourself the headache and do DHCP.
Okay - otherwise, this sucker is easy as pie to set up. Plug it in to your LAN adapter (I have PS2 so it is a little box on the back of the game thing - don't know about Xbox). Then plug the cord into the WGA. Turn the WGA on and set it to the channel of your WAP. It should start talking IMMEDIATELY. If not - you have done something wrong.
The CD for the PC is interesting. Like most linksys products - it looks nice and is full featured. You won't need the CD for configuring the WGA unless you plan on using WEP.
The infrastucture mode is really fast. I must say that I play online alot.... and this connection point on PS2 shows virtually no lag. I don't know what Sony did via their gaming networks - but this sucker runs QUICK. Like I said, virtually no lag.
The real bummer is that about 99% of the games out there are not multiplayer yet. The ones that are, however, are really fun to play. I play MOH:RS, Desert II, and a few others online. The games are quick paced. To really take advantage of it, however, you might want to go "full bore" and invest in a USB headphone/mic set so you can "talk to people". Also, the USB keyboard might be a nice feature too... although I don't have that...
I've seen quite a few game adapters out there (do a search on Amazon - you will see). This is the best one I've seen for the money.
One last thing - I'd forget "Wireless G" adapaters. Again, unless your connection is like a T3 line straight to the house (which 99% of most people do not have) - you're only as fast as your smallest connection - which is likely to be the ADSL/Cable router connection. Comcast is 3MB - which I NEVER get (even burst inside Comcast's net). So B is MORE than enough bandwidth. I heard some guy at Best Buy trying to talk up a Wireless-G adapter saying he would get "better performance" - and while that is true.. it's like putting brand new wheels on a car with an underpowered engine... yeah, it will look better... but it won't go faster.
See you out there...

Click Here to see more reviews about: Cisco-Linksys WGA11B Wireless-B Game Adapter

The LINKSYS WGA11B Wireless-B Game Adapter gives any wired Ethernet equipped game console wireless connection capability. If you have an existing home wireless network with a cable or DSL Internet connection, the Game Adapter lets your PlayStation, XBOX, or GameCube attach to the network so you can get into online games without running wires to the game room. Or, you can use a pair of Game Adapters to form a "cable-less cable" between two game consoles for head-to-head gaming -- in the same room, or all the way across the house!

Buy Now

Click here for more information about Cisco-Linksys WGA11B Wireless-B Game Adapter

Read More...

Friday, December 23, 2011

Alfa 9dBi WiFi Booster SMA OMNI-Directional High-Gain Screw-On Swivel Antenna with Magnetic Base for TRENDnet - TEW-203PI, TEW-228PI, TEW-403PI, TEW-423PI, TEW-223PI, TEW-303PI PCI, TEW-231BRP, TEW-2K1, TEW-435BRM, TEW-432BRP, TEW-430APB, TEW-434APB, TEW-452BRP, TEW-450APB, TEW-453APB, TEW-443PI, TEW-632BRP, TEW-630APB, TEW-623PI and TEW-631BRP Review

Read More...

Saturday, October 1, 2011

Cisco-Linksys WPC54GX Wireless-G Notebook Adapter with SRX Review

Cisco-Linksys WPC54GX Wireless-G Notebook Adapter with SRX
Average Reviews:

(More customer reviews)
I bought this card along with the WRT54GX router. My house has two stories and plenty of walls. Before I had 3 11a Access Points. Now I only have the WRT54GX. This card works as advertised. I can get 108mbps with almost 100% signal anywhere in my house.
With this card, I can also get a strong signal from my neighbor's wireless network :-)
My only gripe is that if you want to use WPA, you can use the Linksys wireless utility. You must use the windows one. I find the Linksys one better. Minor complaint though.

Click Here to see more reviews about: Cisco-Linksys WPC54GX Wireless-G Notebook Adapter with SRX

Whether you're upgrading to a higher-end adapter or setting up your first home network, the Linksys WPC54GX Wireless-G notebook adapter is your ticket to wireless convenience and optimal performance. The SRX-enhanced cardbus adapter gives you the mobility to use your laptop PC anywhere in the house--and, when used in concert with other SRX-enabled networking components, you'll enjoy unparalleled range and speed. The WPC54GX uses Linksys's advanced SRX (Speed and Range eXpansion) technology, which enhances the speed and reach of a Wireless-G (802.11g) network. Relative to standard 802.11g technology, a network using all SRX products can extend network reach up to three times as far and boost wireless network speed by up to eight times. (Actual throughput, speed, and range depend on a host of factors, from building materials to network traffic and distance from your network router.) The device is Wi-Fi-certified and backward compatible with 802.11b (Wireless-B), 802.11g (Wireless-G) and, of course, other Linksys SRX products. The minimum operating system requirement is Windows 2000 or Windows XP. Mixed wireless environments such as networks containing SRX, Wireless-B, and Wireless-G products can operate each client at its own maximum data rate. SRX products maintain their higher speed and range, providing the throughput and quality of service to deliver applications such as VoIP (Internet telephony) and video streaming. SRX is based on MIMO (multiple-in, multiple-out) technology, a key component in the upcoming Wireless-N (802.11n) standard. To improve range and speed, MIMO uses two radios and three antennas on a wireless cardbus adapter or client adapter. What's in the Box A Wireless-G cardbus adapter, a quick-installation guide, a resource CD-ROM, and a user's manual.


Buy NowGet 73% OFF

Click here for more information about Cisco-Linksys WPC54GX Wireless-G Notebook Adapter with SRX

Read More...

Thursday, September 22, 2011

Cisco Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter ( AIR-PCM352 ) Review

Cisco Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter ( AIR-PCM352 )
Average Reviews:

(More customer reviews)
I manage the wlan at work and test numerous cards. The Cisco 350 series is what we rolled of company wide for for employee use. The Client software (ACU) included with the card is straight forward and provides great info on the current connection and link status.
One thing you can do with this card that you can't with others is modify the transmit power for the card. The primary difference between the Cisco 340 and 350 series is the transmit power. On the 350 you can change this from 1mw to 100mw (the 340 series peaks at 30mw). This feature is especially handy, especially when taking my laptop from work to home (you just don't need 100mw of transmit power in a 1200 ft. apartment).
The hardware is great (Cisco acquired Aironet around 97 I think), the software is intuitive, and is fully compatible with many authentication methods other than wep (i.e., TLS, MD5, EAP, LEAP).
So why did I give this card a 4 star rating instead of 5 stars? Three reasons:
Client side software does not roam between discontiguous networks when using advanced authentication
Client side software does not include any kind of sniff feature to see what wireless networks are within range. I have to use third party software for that.
Cisco cards do not do true rfmon passive packet acquisition. Cisco (and I think Lucent) diverged from the prism 2 chip , so i keep my Cisco card for work and keep a linksys wpc11 (prism2 chipset) for "network analysis".
Hope this helps. Peace to all wifi junkies out there.

Click Here to see more reviews about: Cisco Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter ( AIR-PCM352 )

IEEE 802.11b 11Mbps wireles DSSS Type II PC Card adapter, 128-bit WEP

Buy Now

Click here for more information about Cisco Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter ( AIR-PCM352 )

Read More...

Friday, September 9, 2011

Sabrent USB-802N Wireless 802.11n USB 2.0 Wifi MIMO Network 300Mbps WLAN adapter Review

Sabrent USB-802N Wireless 802.11n USB 2.0 Wifi MIMO Network 300Mbps WLAN adapter
Average Reviews:

(More customer reviews)
This thing has NO range...It could be 2ft from a router and still register weak signals. Also DON'T even try to use the driver disc it comes with...not readable on one computers' drive and readable but has too many errors from another. I had to go to their website and dl the driver install setup program....and that didn't work...I THEN had to install the driver update. Drivers seem to work fine. The interface GUI is CRAP as well.
DO NOT BUY THIS ITEM!!!!

Click Here to see more reviews about: Sabrent USB-802N Wireless 802.11n USB 2.0 Wifi MIMO Network 300Mbps WLAN adapter



Buy NowGet 49% OFF

Click here for more information about Sabrent USB-802N Wireless 802.11n USB 2.0 Wifi MIMO Network 300Mbps WLAN adapter

Read More...

Friday, July 29, 2011

Linksys PLTK300 PowerLine Network Kit Review

Linksys PLTK300 PowerLine Network Kit
Average Reviews:

(More customer reviews)
My wi-fi experiences a problem in a certain part of the house. I had tried different routers including 'N' and the signal would randomly and frequently drop in this one area. I installed the PowerLine in under 30 minutes. The two computers connected have not experienced any outages ever since. Don't forget NOT to plug either unit into a power strip or APS. It will only work if the plugs are directly into the wall socket.

Click Here to see more reviews about: Linksys PLTK300 PowerLine Network Kit

The Linksys Powerline Network Kit contains a single-port Powerline Adapter, and a four-port Powerline Adapter, which let you easily create a network using the existing electrical outlets in your home. Now you don't have to drill holes in walls and climb through the attic or cellar to install network cables -- just use the wires that already run through the building.With Powerline Network Adapters, you can connect computers or any other wired Ethernet device using the HomePlug 1.0 with Turbo network standard. They also work with older HomePlug 1.0 devices. Adding devices to the network is as simple as plugging a Powerline Adapter into an electrical outlet, and connecting your Ethernet-equipped devices to the built-in Ethernet ports. Additional devices can be connected to the same network using additional Powerline Adapters plugged into any electrical outlet anywhere in the house.

Buy NowGet 20% OFF

Click here for more information about Linksys PLTK300 PowerLine Network Kit

Read More...

Thursday, June 30, 2011

Siemens HOMEPLUG/POWERLINE MINI ( 936-2521-001 ) Review

Siemens HOMEPLUG/POWERLINE MINI ( 936-2521-001 )
Average Reviews:

(More customer reviews)
I purchased the Siemens 2521, 2501 and 2502 Powerline adapters and connected them to the outlets in my home, (which is less than five years old). The setup was easy but the included instruction guide stated little more than "plug it in".
The problems began when I installed the included configuration software on my three computers equipped with WINDOWS ME and discovered that the utility program either froze Windows or took close to 2 minutes to start. The SpeedStream Support staff is aware of the problem and told me that "the programmers at Efficient Networks are working on it".
But the biggest issue I have is that none of the three Powerline products will stay connected for more than 10 minutes! I have tried changing outlets and even tried hooking up the adapters at my friend's house but these things simply refuse to maintain a connection.
Bottom line: Unless you enjoy loosing your network connection and having to get up and reset adapters every ten minutes, stay away from Siemens Powerline products...at least for now.

Click Here to see more reviews about: Siemens HOMEPLUG/POWERLINE MINI ( 936-2521-001 )



Buy Now

Click here for more information about Siemens HOMEPLUG/POWERLINE MINI ( 936-2521-001 )

Read More...